Installation For Sun Solaris; From Cd-Rom - Xerox 6204 Installation Manual

9. In the Utilities & Applications section, double click on the "Accxes Client Tools (ACT) &
Accxes Account Management Tool (AMT) hyperlink."
10. Select the Open or Save button to start the zip file download, which may take an hour.
11. Double click on the downloaded zip file. Extract the files. Double click on the install.exe
to start the installation software.
12. Follow the instructions on the screens, as explained in the above section here, entitled

"From CD-ROM".

Installation for Sun Solaris

The following installation procedure is for the Sun Solaris 2.8, 2.9, or 2.10 based environments.
Note: If you are using Solaris, you need to download the patches for JVM 1.4.2.06 from the
Internet for your version of Solaris.
From CD-ROM:
1. Start your Sun Solaris workstation and log on to your desktop.
2. Insert the Accxes Client Tool & Account Management Tool CD into your CD-ROM drive.
3. In a command window, type the following:
cd <cd-rom mount point>
./setup.bin
NOTE: In all cases <cd-rom mount point> is the directory where the CD-ROM is
mounted.
4. The Install Anywhere software will load.
5. Follow the directions on the screens.
6. On the "Choose Shortcut Location" screen, select where you want the shortcut to be
located. On Sun Solaris it cannot be located on the desktop. Click the Next button.
7. On the "Choose Install Set" screen, select the FreeFlow Accxes Client Tools button and
Next button. On the Install Complete screen, click the Done button.
8. Remove the Client Tools CD.
NOTES: ACT does not support a parallel port on Solaris; therefore it will not be listed on
the Device Manager tab.
When running the ACT under Solaris version 2.6 and 2.7, the arrow keys will function
using the arrow keys on the numeric key pad instead of the keyboard's separate arrow
keys.
Xerox FreeFlow Accxes Drivers & Client Software Installation Guide 9