NetApp ASA A150 Manual page 6

Install and maintain
Hide thumbs Also See for ASA A150:
Table of Contents

Advertisement

restore -address *
If the command fails, contact NetApp Support.
mysupport.netapp.com
b. Verify that the
Restored
display available:
c. Shut down the impaired controller.
3. If you saw the message This command is not supported when onboard key management is enabled,
display the keys stored in the onboard key manager:
a. If the
Restored
▪ Go to advanced privilege mode and enter
▪ Enter the command to display the OKM backup information:
show
▪ Copy the contents of the backup information to a separate file or your log file. You'll need it in
disaster scenarios where you might need to manually recover OKM.
▪ Return to admin mode:
▪ Shut down the impaired controller.
b. If the
Restored
▪ Run the key-manager setup wizard:
target/impaired node name
▪ Verify that the
manager key show -detail
▪ Go to advanced privilege mode and enter
▪ Enter the command to display the OKM backup information:
show
▪ Copy the contents of the backup information to a separate file or your log file. You'll need it in
disaster scenarios where you might need to manually recover OKM.
▪ Return to admin mode:
▪ You can safely shutdown the controller.
Verify NSE configuration
Steps
1. Display the key IDs of the authentication keys that are stored on the key management servers:
key-manager query
◦ If the
Restored
the impaired controller.
4
column displays
security key-manager query
column displays
manually back up the onboard key management information:
yes
set -priv admin
column displays anything other than yes:
Enter the customer's onboard key management passphrase at the prompt. If the
passphrase cannot be provided, contact
Restored
column displays
set -priv admin
column displays
and all key managers display available, it's safe to shut down
yes
yes
for all authentication keys and that all key managers
security key-manager key show -detail
when prompted to continue:
y
security key-manager setup -node
mysupport.netapp.com
yes
for all authentication key:
when prompted to continue:
y
set -priv advanced
security key-manager backup
security key-
set -priv advanced
security key-manager backup
security

Advertisement

Table of Contents
loading

Table of Contents