Preparing To Print - Xerox DocuColor 3535 Quick Start Manual

Fiery network controller

Hide thumbs Also See for DocuColor 3535:

6 Quick Start Guide

UNIX (TCP/IP) workstation

IPX (Novell) network

Other Network Requirements

• Standard TCP/IP connectivity (for example, Sun SPARCStation or Silicon Graphics

workstation with Solaris version 2.6 or later or SunOS version 4.1.x software or RedHat

Linux version 7.2)

• TCP/IP printing software that conforms to RFC1179 (Berkeley lpd protocol)

• Novell server

• Novell NetWare software version 4.x or 5.x

• NDPS gateway in Netware 5.x

• Support for Ethernet SNAP, Ethernet II, Ethernet 802.3, and Ethernet 802.2 frame types

Preparing to print

To set up your Fiery, you must perform the following tasks:

• Connect the Fiery physically to a functioning network.

• Conﬁgure the network server.

• Set up the Fiery from the Copier Control Panel and from Command WorkStation

or WebSetup.

• Prepare client workstations for printing.

A brief explanation of each task follows.

Connecting the Fiery to a functioning network

When you add the Fiery to a network, it is assumed that a network

OTE

administrator has already installed a network cabling system and has connected

workstations and servers. For examples of different networks, see the

Guide.

Conﬁguration

Table of Contents