Xerox DocuColor 240 Release Note page 10

9 Click OK to close the Properties window.
10 Set the number of copies.
11 Click OK to submit the job for printing.
Printing a PDF document as a booklet on Windows (PCL printer driver)
Booklet printing requires that a finisher is installed on the copier and that the printer driver is
configured with the installed finisher. For information about configuring installable options,
see Printing from Windows.
The following procedure explains how to set the correct print options for printing an 8.5
PDF document as a booklet on 11
A3 paper, using the Windows PCL printer driver.
T PDF
O PRINT A DOCUMENT AS A BOOKLET USING THE
1 Open the document in Adobe Acrobat or Acrobat Reader.
2 Select File > Print Setup.
3 Set the Paper Size to 11x17 SEF (A3 SEF).
4 Select File>Print, choose the Fiery as your printer, and then click Properties.
5 In the Fiery Printing tab, open the Paper Source bar and choose the following setting:
11 17 SEF (A3 SEF)
Page Size: x
6 Open the Layout bar and choose the following setting:
Portrait
Orientation:
7 Open the Finishing bar and choose the following settings:
Top-Top
Duplex:
Face-down Printing:
Fasten Mode: Fold or Fold and Staple
N : For the limitations on folding and stapling, see "Fasten Mode" on page 12.
OTE
Booklet Output Tray
Output Tray:
Booklet Maker:
8 Optionally, set one or more of the following options under the Finishing bar:
• Creep Adjustment
• Back Cover
• Front Cover
• Cover Source
17 paper, or for printing an A4 document as a booklet on
x
W
Face Down
Saddle
PCL
INDOWS PRINTER DRIVER
Page 10
x 11
Part Number: 45045321