Xerox CopyCentre 133 Supplementary Manual page 9

Procedures for Network Scanning Setup
1. Create templates and repositories via CentreWare Internet Services.
2. On the control panel, select
3. Select a template from the list. You can also change any other value from the control panel without
impacting the template configuration; only the current job will be affected.
4.
Load a sample document into the document feeder.
5.
Press the green Start button. The job is sent to the server using FTP or SMB protocol as defined within
the template.
6. Log on to the FTP or SMB Server. Navigate to the repository (destination) that was specified earlier.
Your scanned document is located in that folder.
Note
If Kerberos (remote authentication) has been enabled, a separate login screen appears when the
Network Scanning feature is selected. Documents are not scanned in unless the Kerberos server
authenticates user access.
Network Scanning.
Xerox WorkCentre
7
®
Pro 123/128/133
Quick Network Scanning Setup