Printing Onto Tabs - Xerox CopyCentre 232 Supplementary Manual

5

Printing onto tabs

This chapter describes how to add tab stock (either imaged or blank) to a printed
document.
Setup
Refer to the Section 2, Setup on page 3. and:
1
Load the tab stock into the Bypass Tray, Tray 1 or Tray 2
2
Create your tab master pages
Printing a document with printed tab dividers
Note:
– Both PostScript and PCL print drivers can be used to print onto tab dividers.
1
With your document open, select File > Print.
2
Select your WorkCentre or WorkCentre Pro 232/238/245/255/265/275 print driver.
3
Select Properties. The Document Properties screen will appear.
4
Select the Special
Pages tab.
14 Xerox CopyCentre, WorkCentre, WorkCentre Pro 232/238/245/255/265/275 Tab Supplement