Work Mode - Hitachi Zaxis 850LC-3 Operator's Manual

WORK MODE

1. When the basic screen displays, push key F1 and display
the work mode screen.
2. Push the key located under an attachment mark to be
used in order to select the attachment.
• Digging Mode
• Breaker 1 Mode
• Breaker 2 Mode
• Breaker 3 Mode
• Breaker 4 Mode
Breaker 1Mode (Initial Setting
Flow Rate 260L/min)
Breaker 2Mode (Initial Setting
Flow Rate 300L/min)
Breaker 3Mode (Initial Setting
Flow Rate 320L/min)
Breaker 4Mode (Initial Setting
Flow Rate 350L/min)
NOTE: The manufacturer of the hydraulic breaker may change
the hydraulic breaker specifications without giving no-
tice. Contact your nearest Hitachi dealer for any ques-
tionable points.
OPTIONAL ATTACHMENTS AND DEVICES
Select this mode switch when using OKADA OUB 330 respectively.
Select this mode switch when using FURUKAWA F-70, MITSUBISHI MKB6000V re-
spectively.
Select this mode switch when using NPK E-240A, MITSUBISHI MKB7000V respec-
tively.
Select this mode switch when using NPK E-260B respectively.
F1 Key
Breaker 1
Mode
13-2
Basic Screen
Breaker 2 Breaker 3
Mode Mode
M1J1-01-002
T1J7-02-002E