Clean Feed Pump Strainer - Hitachi Zaxis 850LC-3 Operator's Manual

5 Clean Feed Pump Strainer

--- every 500 hours
1. Remove the feed pump (2) inlet hose joint bolt (1), lo-
cated at the water separator inlet.
2. Remove strainer (3) from joint bolt (1) using a screw driv-
er.
3. Clean strainer (3) using diesel fuel.
4. Install and tighten strainer (3) in joint bolt (1).
5. Install and tighten joint bolt (1).
6. After replacing for filter, bleed air from the fuel system.
MAINTENANCE
7-54
3
2 1
1
M157-07-191
M1JB-07-039