Transporting By Road; Transporting The Machine By Trailer; Loading/Unloading On A Trailer - Hitachi Zaxis 850LC-3 Operator's Manual

TRANSPORTING BY ROAD

When transporting the machine on public roads, be
sure to first understand and follow all local regulations.
• When transporting using a trailer, check the width, height,
length and weight of the trailer with the machine loaded.
• Investigate beforehand the conditions of the route to be
traveled, such as dimensional limits, weight limits, and
traffic regulations.
In some cases, disassemble the machine to bring it within di-
mensional limits or weight limits of local regulations.

TRANSPORTING THE MACHINE BY TRAILER

When using a trailer, the machine can be transported as one
unit. Provide an appropriate trailer, referring to the dimen-
sions of the machine in the transport position, as shown in the
Transporting section.
As for the ZAXIS600 excavator, be sure to retract the side frame
before loading the machine onto trailer bed for transportation.
(Refer to the section for "Extension and contraction of track
frame" in this section.)

LOADING/UNLOADING ON A TRAILER

Always load and unload the machine on a firm, level surface.
WARNING: Be sure to use a loading dock or a ramp for
loading/unloading.
Ramp/Loading Dock:
1. Before loading, thoroughly clean the ramp and flatbed.
Dirty ramps or flatbeds with oil, mud, or ice on them are
slippery and dangerous.
2. Place blocks against the truck and trailer wheels while us-
ing a ramp or loading dock.
3. Ramps must be sufficient in width, length, and strength.
Be sure that the incline of the ramp is less than 15 de-
grees.
4. Loading docks must be sufficient in width and strength
to support the machine and have an incline of less than
15 degrees.
TRANSPORTING
6-16
M111-06-029
M111-06-029