Table of Contents
Advertisement
Operation & Technical Specifications
WARNING: The heater must be properly installed before it is used. This unit is
equipped with one heat setting On I Off.
Connect the power cable to a 220-240V, 13
amp supply that is located in a safe, dry area.
• Press the [ I ] button, the heater will enter
ready mode.
• Touch the touch switch once, the heater will
be on 800W.
• Touch the touch switch twice, the heater
will be on 1200W.
• Touch the touch switch three times, the
heater will be on 2000W.
• Touch the touch switch four times, the heat
will turn off.
• Press the button [ O ], the heater will turn off.
On | Off Switch
Remote Control
• Press the LOW button, the heater will be
on 800W.
• Press the High button, heater will be
on 1200W.
• Press the LOW and High button at the same
time, heater will be on 2000W.
Technical Specifications
• Power supply 230V~ 50-60Hz
• Wattage max 2100w
• Net weight 16.5 kg
• Insulation class I
Touch Switch
Advertisement
Table of Contents
