Subscribe to Our Youtube Channel
Related Manuals for KALOS KLEH101-0100
Summary of Contents for KALOS KLEH101-0100
- Page 1 Assembly Instructions Headline Plush Electric Heater Floor Standing KLEH101-0100 IMPORTANT PLEASE KEEP THIS BOOKLET FOR FUTURE REFERENCE. THIS IS IMPORTANT INFORMATION REGARDING THE USE AND CARE OF YOUR OUTDOOR HEATER. ASSEMBLY PERSONS TIME REQUIRED Oct 2021...
- Page 2 Important Information Unpack the outdoor heater making sure that all of the items are present and that there are no components left in the box and the heater head is free from any packaging material. Extra packaging is added to some models for transportation protection which must be removed before assembly.
-
Page 3: For Your Safety
For Your Safety Warning Caution • This heater is not equipped with a device • Some parts of this product can become DO NOT to control the room temperature. very hot and cause burns. Particular use this heater in small rooms when they attention must be given where children, are occupied by persons not capable of vulnerable people and animals are... - Page 4 For Your Safety 11. The marking concerning covering should DO NOT attempt to repair or adjust any be visible after the heater has been electrical or mechanical functions on this installed. It shall not be placed on the unit. Doing so will void your warranty. back of portable heaters.
- Page 5 For Your Safety DO NOT 38. One dark point may exist on the surface insert or allow foreign objects to enter any ventilation or exhaust of the heating elements during the opening as this may cause an electric first few minutes after it is turned on. shock or fire, or damage the heater.
- Page 6 Assembly WARNING: Please tear off all of the protective film around the shade first. • Step 1: Fix the bottom tube onto the base. • Step 2: Connect the middle tube with bottom tube by screwing them together. • Step 3: Connect the top tube with middle tube by screwing them together.
- Page 7 Assembly • Step 5: Connect the heater head with the tube by screwing them together. • Step 7: Fix the Power Cord on the Base by using 4x12mm screws.
- Page 8 Assembly • Step 8: We strongly recommend that the base is fixed to the floor using the fixings provided. Finished...
-
Page 9: Installation
Installation The heater is built with the best quality CEILING components in accordance to the prevailing legal regulations and certified for safety in use. For best results, please ensure that the installation is done by a qualified electrician in accordance with the following min. - Page 10 Operation Instructions WARNING: The heater must be properly installed before it is used. This unit is equipped with one heat setting On I Off. Connect the power cable to a 13 amp supply that is located in a safe, dry area. A.
-
Page 11: Remote Control
Remote Control & Technical Specifications Remote Control To operate heater, press the remote control button. Press on the “Low” button for 900W, press on the “High” button for1200W. Both buttons are pressed for 2100W. Touch Switch • Press the button once to operate the heater on low (900W) power. •... - Page 12 Maintenance and Care Instructions Headline • When disconnected from the electrical supply, clean the outside of the patio heater with a damp cloth. Never use corrosive or solvent cleaners or immerse in water. • Any maintenance or repairs including replacing the halogen tube should only be carried out by a qualified electrician or by a qualified service centre.
Need help?
Do you have a question about the KLEH101-0100 and is the answer not in the manual?
Questions and answers