Table of Contents
Advertisement
Installation
This heater is built with the best quality
components in accordance to the prevailing
legal regulations and certified for safety
in use. For best results from the appliance
please ensure that the installation is done by
a qualified electrician in accordance with the
following instructions and taking full account
of current regulations. When using the heater,
please carefully follow the instructions and
recommendations below.
Connection to 220-240 Volts Power Supply
• It is important to ensure that the electricity
supply is of adequate capacity for the
electrical load required by the appliance
being installed.
Minimum required
distances:
• 250mm from the side wall
• 500 mm from the ceiling
• Generally heaters must be placed at a safe
distance (clear space) of at least 2.0m from
combustible materials and glass walls. If
installed in workshops or garages where
inflammable or combustible paints are
used, the heaters must be installed at a
distance of at least 4.0m from the source
of danger.
• If the heaters are placed in areas where
spray painting of any description is taking
place, they should not be used during the
painting operations.
• Never use the heater in particularly in dusty
and explosive areas.
Warning
These appliances must be earthed.
This warning symbol
indicates that the surface is
hot and caution is required.
CEILING
min. 25cm
Advertisement
Table of Contents
