Table of Contents
Advertisement
Operation Instructions
WARNING:
equipped with one heat setting On I Off.
Operation
• Plug the Patio Heater into a grounded 220-240V 50-60Hz power outlet.
• Only operate the heater when it is in the upright position.
• Press on the On/Off switch to the "I" position to activate the heater.
Remote Control
• To operate the heater on 2000W power, press the button (
remote control.
• To operate the LED light on, press the button (
Touch Switch
A. Touch the
one time, turns the heater on 2000W power.
B. Touch the
two times, turns the LED on.
C. Touch the
three times, turns the heater on 2000W power and
turns the LED on.
D. Touch the
four times, turns the heater and LED off.
To turn off the heater, press the On/Off switch to the "O" position.
• Although the patio heater is shower proof, do not use when raining or in wet conditions.
• Always disconnect the power cable from the electrical supply, when the patio heater is
not in use.
The heater must be properly installed before it is used This unit is
) of the
) of the remote control
On/Off Switch
Advertisement
Table of Contents
