Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for KALOS KLEH163-0600C
Summary of Contents for KALOS KLEH163-0600C
- Page 1 Assembly Instructions Headline Ibiza Wall Mounted Electric Heater KLEH163-0600C IMPORTANT PLEASE KEEP THIS BOOKLET FOR FUTURE REFERENCE. THIS IS IMPORTANT INFORMATION REGARDING THE USE AND CARE OF YOUR HALOGEN HEATER. ASSEMBLY PERSONS TIME REQUIRED Oct 2020...
- Page 2 Important Information Unpack the halogen heater making sure that all the items are present and that there are no components left in the box and that the heater head is free from any packing material. Using the detailed drawing follow the steps to assemble your halogen heater. DO NOT connect the halogen heater to the electrical supply until all the assembly is complete.
-
Page 3: For Your Safety
For Your Safety Warning Caution • This heater is not equipped with a • Some parts of this product can become device to control the room temperature. very hot and cause burns. Particular DO NOT use this heater in small rooms attention has to be given where children when they are occupied by persons and vulnerable people are present. - Page 4 For Your Safety 12. The unit must be placed with the DON’T use this unit as a cloth drier clearance of 180cm to the floor and or towel drier. 30cm to the ceiling. DON’T use this unit as a sauna heater. 13.
-
Page 5: Installation
Installation Ibiza Wall Mounted Heater is built with the best quality components in accordance to the prevailing legal regulations and certified for safety in use. For best results from the appliance please ensure that the installation is done by a qualified electrician in accordance with the following instructions and taking full account of current regulations. - Page 6 Installation CEILING min. 15cm • The heater must be fixed to a wall with the bracket supplied to allow adequate ventilation. • Never fix or place heater near flammable or combustible materials. • Generally heaters must be placed at a safe distance (clear space) of at least 2.0m from combustible materials and glass walls.
- Page 7 Assembly to Wall Parts Name Explosive bolt M6*50 M6 spanner ‘L’ hexagonal wrench(4mm) Remote control • Step 1: put 4 Explosive bolt M6*50 into the wall.
- Page 8 Assembly to Wall • Step 2: Take off the nuts, the spring locks washers and the plain washers from four explosive bolts. Keep them for the next step. • Step 3: Install the heater on the wall...
- Page 9 Assembly to Wall Finished...
- Page 10 Assembly to Ceiling Parts Name Changing Chain Components • Step 1: Install the lifting ring screw on the lifting chain component into 2 screw hol es on the back of the product and twist tightly.
- Page 11 Assembly to Ceiling • Step 1: Hang the product from a secure ceiling. CEILING Finished...
-
Page 12: Remote Control
Operation Instructions Connect the power cable to a 13 amp supply which is located in a safe, dry area. The switch on the heater is used to control the Heater. When the position mean on the , the standby light will be turn orange, the heater will be in standby mode. -
Page 13: Troubleshooting
Operation Instructions Trouble Shooting Technical specification • Power supply 220V-240V 50Hz If the heater will not operate, please check the following before seeking repair of service: • Wattage max 2000W • Check if the power cord is plugged into an •... - Page 14 Maintenance and Care Instructions Headline • Unplug the unit and let it cool completely. • When disconnected from the electrical supply, clean the outside of the patio heater with a damp cloth. Never use corrosive or solvent cleaners or immerse in water. •...