KALOS KLEH151-0500 Assembly Instructions Manual

Terrace table top electric heater

Advertisement

Quick Links

Assembly Instructions
Headline
Terrace Table Top
Electric Heater
KLEH151-0500
IMPORTANT
PLEASE KEEP THIS BOOKLET FOR FUTURE REFERENCE.
THIS IS IMPORTANT INFORMATION REGARDING THE USE AND
CARE OF YOUR HALOGEN HEATER.
ASSEMBLY
PERSONS
TIME
REQUIRED
Sept 2020

Advertisement

Table of Contents
loading

Summary of Contents for KALOS KLEH151-0500

  • Page 1 Assembly Instructions Headline Terrace Table Top Electric Heater KLEH151-0500 IMPORTANT PLEASE KEEP THIS BOOKLET FOR FUTURE REFERENCE. THIS IS IMPORTANT INFORMATION REGARDING THE USE AND CARE OF YOUR HALOGEN HEATER. ASSEMBLY PERSONS TIME REQUIRED Sept 2020...
  • Page 2 Important Information Unpack the halogen heater making sure that all the items are present and that there are no components left in the box and that the heater head is free from any packing material. Using the detailed drawing follow the steps to assemble your halogen heater. DO NOT connect the halogen heater to the electrical supply until all the assembly is complete.
  • Page 3: For Your Safety

    For Your Safety Warning Caution • This heater is not equipped with a • Some parts of this product can become device to control the room temperature. very hot and cause burns. Particular DO NOT use this heater in small rooms attention has to be given where children when they are occupied by persons and vulnerable people are present.
  • Page 4 For Your Safety 12. The unit must be placed with the DON’T use this unit as a cloth drier clearance of 100cm to the wall. or towel drier. 13. The unit must be correctly installed DON’T use this unit as a sauna heater. according to the instructions.
  • Page 5 For Your Safety DON’T 43. Avoid the use of an extension cord operate any heater with a damaged cord or after the heater because the extension cord may malfunctions, has been drooped overheat and cause a risk of fire. or damaged in any manner. Return However, if you have to use an extension cord, the cord shall be 2.5mm2 minimum heater to authorized service facility for...
  • Page 6: Installation

    Installation WARNING! These appliances must be earthed. Before installing or replacing the bulb, the appliance must be always being disconnected from the 220-240V supply. Patio Heater ZHQ2068H-T is built with the best quality components in accordance to the prevailing legal regulations and certified for safety in use. For best results from the appliance please ensure that the installation is done by a qualified electrician in accordance with the following instructions and taking full account of current regulations.
  • Page 7 Assembly • Step 1: Connect the tube with base by screwing them together. • Step 2: Pull the power cord through the pole and base. Finished...
  • Page 8 Assembly • Step 3: Connect the power cord plug to the socket in the heater head. • Step 4: Connect the heater head with the tube by screwing them together.
  • Page 9 Assembly • Step 5: Fixed the power cord with the press clip in the base. Finished...
  • Page 10: Remote Control

    Operation Instructions Connect the power cable to a 220-240V, 13 amp supply that is located in a safe, dry area. Press the button ,the heater will be ready mode. • Touch the touch switch once, the heater will be on 800W. •...
  • Page 11: Troubleshooting

    Operation Instructions Trouble Shooting Technical specification • Power supply 220-240V, 50Hz If the heater will not operate, please check the following before seeking repair of service: • Wattage max 2000W • Check if the power cord is plugged into an •...
  • Page 12 Maintenance and Care Instructions Headline • Unplug the unit and let it cool completely. • When disconnected from the electrical supply, clean the outside of the patio heater with a damp cloth. Never use corrosive or solvent cleaners or immerse in water. •...

Table of Contents