Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for KALOS KLEH111-0200
Summary of Contents for KALOS KLEH111-0200
- Page 1 Assembly Instructions Universal Electric Heater Floor Standing KLEH111-0200 IMPORTANT PLEASE KEEP THIS BOOKLET FOR FUTURE REFERENCE. THIS IS IMPORTANT INFORMATION REGARDING THE USE AND CARE OF YOUR HALOGEN HEATER. ASSEMBLY PERSONS TIME REQUIRED Sept 2020...
- Page 2 Important Information Unpack the halogen heater making sure that all the items are present and that there are no components left in the box and that the heater head is free from any packing material. Using the detailed drawing follow the steps to assemble your heater. DO NOT connect the heater to the electrical supply until all the assembly is complete.
-
Page 3: For Your Safety
For Your Safety Warning Caution • This heater is not equipped with a • Some parts of this product can become device to control the room temperature. very hot and cause burns. Particular DO NOT use this heater in small rooms attention has to be given where children when they are occupied by persons and vulnerable people are present. - Page 4 For Your Safety 14. The unit must be handled with care, and DO NOT use this heater with a avoid vibration or hitting. programmer, timer, separate remote- control system or any other device that 15. If the unit gets damaged, it must be switches the heater on automatically, repaired by professional electricians.
-
Page 5: Installation
Installation This heater is built with the best quality CEILING components in accordance to the prevailing legal regulations and certified for safety in use. For best results from the appliance please ensure that the installation is done by a qualified electrician in accordance with the following instructions and taking full account of current regulations. - Page 6 Assembly WARNING: Please tear off all of the protective film around the shade first. • Step 1: Connect the tube with base by screwing them together. • Step 2: Pull the power cord through the pole and base. • Step 3: Connect the power cord plug to the socket in the heater head.
- Page 7 Assembly • Step 4: Connect the heater head with the tube by screwing them together. • Step 5: Fixed the power cord with the press clip in the base. • Step 6: Fix the heater on the floor. Bore three holes in the floor, fix the heater by three wedge bolts on the floor tightening the...
-
Page 8: Remote Control
Operation & Technical Specifications WARNING: The heater must be properly installed before it is used. This unit is equipped with one heat setting On I Off. Remote Control Connect the power cable to a 220-240V, 13 amp supply that is located in a safe, dry area. •... -
Page 9: Maintenance And Care Instructions
Maintenance and Care Instructions • When disconnected from the electrical supply, clean the outside of the patio heater with a damp cloth. Never use corrosive or solvent cleaners or immerse in water. • Any maintenance or repairs including replacing the halogen tube should only be carried out by a qualified electrician or by a recommended service center.
Need help?
Do you have a question about the KLEH111-0200 and is the answer not in the manual?
Questions and answers