Table of Contents
Advertisement
Installation & Assembly
Installation
A. Place the heater on a firm, level ceiling surface; installation of the heater on a strong rigid
support (such as strong wooden beams or metal rails etc).
B. The Hook on the ceiling hanging the Patio Heater must be able to take a weight 3 or 4 times
that of the Patio Heater itself.
C. The distance between the bottom of the Patio Heater to the Floor must be over1.8M.
D. Plug the Patio Heater into a grounded 220-240V 50-60Hz 13A power outlet.
E.
Only operate the heater when it is in the upright position.
Assembly
Follow the below steps to install the heater:
1
WARNING:
Please tear off all of the protective
film around the shade first.
• Step 1: Pull out the
stainless steel wire to a
appropriate position in
direction of up arrow
Advertisement
Table of Contents
