Parameters Of Cellular Module - Advantech ICR-4453 Hardware Manual

4. Technical Parameters

4.4 Parameters of Cellular Module

Parameter
Antenna
5G NR parameters
1
Uplink 2 x 2 MIMO is only supported in 5G SA mode.
2
5G NR FDD bands only support 15 kHz SCS, and NR TDD bands only support 30 kHz SCS.
3
Supported bandwidth in the NSA and SA modes may differ for each frequency band.
ICR-4453 Hardware Manual
Description
• Impedance: 50
• Connector type: SMA (4 pcs)
• 3GPP Rel-15 support
• Supported modulations:
and 256QAM modulation for uplink; QPSK, 16QAM, 64QAM
and 256QAM for downlink
1
• 2 x 2 MIMO uplink support for n41
• 4 x 4 MIMO downlink for n1, n2, n3, n7, n25, n38, n40, n41, n48,
n66, n77, n78, n79
• Supporting SCS 15 kHz
3 3
• SA and NSA operation modes on all the 5G bands
• Option 3x, 3a, and Option 2
• Supported bands: n71 (600 MHz), n12 & n28 (700 MHz),
n20 (EU800 800 MHz), n5 (850 MHz), n8 (900 MHz), n66
(Extended AWS 1700 MHz), n3 (1800 MHz), n2 (1900 MHz),
n25 (Extended PCS 1900 MHz), n1 (2100 MHz), n40 (S-Band
2300 MHz), n41 (2500 MHz), n7 & n38 (2600 MHz), n48 & n78
(3500 MHz), n77 (3700 MHz), n79 (4700 MHz)
• NSA TDD: max. 2.5 Gbps(DL), max. 650 Mbps (UL)
• SA TDD: max. 2.1 Gbps(DL), max. 450 Mbps (UL)
• Max. output power: 26 dBm +2/-3 dB (Class 2)
4.4 Parameters of Cellular Module
/2-BPSK, QPSK, 16QAM, 64QAM
2 2
and 30 kHz
Continued on next page
34