Wall Mounting - Advantech ICR-4453 Hardware Manual

1. Product Overview

1.9 Wall Mounting

The wall mounting clip is included as a standard accessory with the router.
The router can be affixed to a wall or another surface using the wall mounting clips. Two wall mounting
clips are pre-assembled to the router during production and need to be rotated as shown in Figure 9.
Each clip features two holes with a diameter of 5 millimeters for screw placement. For precise mounting
dimensions, refer to Figure
When attaching the wall mounting clip, tighten the screws with a maximum torque of 0.4 Nm.
ICR-4453 Hardware Manual
7 in Chapter 1.7.
Figure 9: Rotated Wall Mounting Clips
1.9 Wall Mounting
13