2. Hardware Functionality
2.7 Low Power Mode
In applications requiring low power consumption, such as solar power (not 24/7 mode), it is strongly
recommended to use the Low Power Mode (LPM) before shutting down the entire router.
LPM (Low Power Mode) is a router mode in which the router enters a sleep state with minimal power
consumption; you can find details about LPM power consumption in Chapter efchap:BasicParams. The
router can be awakened from this mode either by applying a signal to the BIN1 input or after a predefined
period of time. To put the router into LPM mode, you can use the lpm command; for more information, refer
to the
Commands and Scripts
ICR-4453 Hardware Manual
application note.
2.7 Low Power Mode
23