PROAIM SC-04 Assembly Manual

Snaprig super clamp with 5/8” stud, fits 60mm snaprig super clamp with 5/8” stud | fits 60mm

SnapRig Super Clamp with 5/8" Stud | Fits 60mm

Speed Rails/Scaffold Tubes

(SC-04 )

A s s e m b l y M a n u a l

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that is listed

below.

Proaim SnapRig Super Clamp with 5/8" Stud

No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright

statutes or in writing by the Publisher.

Table of Contents

Need help?

Do you have a question about the SC-04 and is the answer not in the manual?

Page 1 Please inspect the contents of your shipped package to ensure you have received everything that is listed below. Proaim SnapRig Super Clamp with 5/8" Stud All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright statutes or in writing by the Publisher.
Page 2 SnapRig Super Clamp with 5/8” Stud Setup • Loosen the knob of Super clamp with 5/8” Stud and open it as shown in the image. Note: Clamp equipped with 5/8’’threaded stud, a 1/4-20, and a 3/8"-16 female threads to securely mount your gear. •...
Page 3 YOUR PROAIM SNAPRIG SUPER CLAMP WITH 5/8” STUD | FITS 60MM SPEED RAILS/SCAFFOLD TUBES ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts.