Input Source; Navi Key - MSI PRO MP275 User Manual

1st Level Menu
Auto Config
Clock
Phase
H. Position
V. Position

Input Source

1st Level Menu
HDMI™
D-Sub
Auto Scan

Navi Key

1st Level Menu
Up
Down
Left
Right
2nd/3rd Level Menu
0-100
0-100
0-100
0-100
2nd Level Menu Description
∙ Users can adjust Input Source in any mode.
OFF ∙ Users can use the Navi Key to select Input Source at
ON
2nd Level Menu Description
OFF ∙ All Navi Key items can be adjusted via OSD Menus.
Brightness
Mode
Alarm Clock
Input Source
Refresh Rate
Info. On Screen
Audio Volume
Description
∙ For D-Sub only, this setting will be grayed out
when detecting other input sources.
∙ Adjust Clock setting.
∙ For D-Sub only, this setting will be grayed out
when detecting other input sources.
∙ Adjust Phase setting.
∙ For D-Sub only, this setting will be grayed out
when detecting other input sources.
∙ Adjust H.Position setting.
∙ For D-Sub only, this setting will be grayed out
when detecting other input sources.
∙ Adjust V.Position setting.
∙ For D-Sub only, this setting will be grayed out
when detecting other input sources.
below status:
• While "Auto Scan" is set to "OFF" with the monitor at
power saving mode;
• While "No Signal" message box is shown on the
monitor.
16