Contents Getting Started ......................3 Package Contents ....................3 Installing the Monitor Stand ................... 4 Adjusting the Monitor ..................... 6 Monitor Overview ....................8 Connecting the Monitor to PC ................11 OSD Setup ........................12 Navi Key ........................ 12 Hot Key ........................12 OSD Menus........................
This chapter provides you with the information on hardware setup procedures. While connecting devices, be careful in holding the devices and use a grounded wrist strap to avoid static electricity. Package Contents Monitor PRO MP275 PRO MP275P Documentation Quick Start Guide Accessories...
PRO MP275 1. Leave the monitor in its protective packaging. Align and gently push the stand bracket towards the monitor groove until it locks in place.
Page 5
PRO MP275P 1. Leave the monitor in its protective packaging. Align the stand bracket to the monitor groove. 2. Tighten the stand bracket with screws. 3. Connect the base to the stand and tighten the base screw to secure the base. 4.
Adjusting the Monitor This monitor is designed to maximize your viewing comfort with its adjustment capabilities. ⚠ Important ∙ Avoid touching the display panel when adjusting the monitor. ∙ Please slightly tilt the monitor backwards before pivoting it. PRO MP275...
Page 10
Power Button & Navi Key Kensington Lock Cable Organizer Cable Routing Hole Power Jack HDMI™ Connector Supports 1920x1080@100Hz as specified in HDMI™ 1.4b. D-Sub Port Line-In Jack For audio playback through the speakers, connect the device’s Line-out jack to this Line-in jack when using the D-Sub port. Headphone Jack...
3. Connect the power cord to the monitor power jack. (Figure A) 4. Plug the power cord into the electrical outlet. (Figure B) 5. Turn on the monitor. (Figure C) 6. Power on the computer and the monitor will auto detect the signal source. PRO MP275 PRO MP275P...
OSD Setup This chapter provides you with essential information on OSD Setup. ⚠ Important All information is subject to change without prior notice. Navi Key The monitor comes with a Navi Key, a multi-directional control that helps navigate the On-Screen Display (OSD) menu. Up/ Down/ Left/ Right: ∙...
OSD Menus Professional 1st Level Menu 2nd/3rd Level Menu Description Mode ∙ Use Up or Down Button to select and preview mode effects. User ∙ Press the Middle Button to confirm and apply Anti-Blue your mode type. Movie Office Black-White Response Time Normal ∙...
Page 14
1st Level Menu 2nd/3rd Level Menu Description Refresh Rate Location Left Top ∙ Location is adjustable in OSD Menu. Press the Middle Button to confirm and apply your Right Top Refresh Rate Location. Left Bottom ∙ This monitor follows and works at the Operating System’s preset Screen Refresh Right Bottom Rate.
1st Level Menu 2nd/3rd Level Menu Description Screen Size Auto ∙ Users can adjust Screen Size in any mode, any resolution and any screen refresh rate. 16:9 Adaptive-Sync ∙ Adaptive-Sync prevents screen tearing. ∙ Activating Adaptive-Sync will affect: Affected Function Function Status »...
1st Level Menu 2nd/3rd Level Menu Description Auto Config ∙ For D-Sub only, this setting will be grayed out when detecting other input sources. Clock 0-100 ∙ Adjust Clock setting. ∙ For D-Sub only, this setting will be grayed out when detecting other input sources.
Setting 1st Level Menu 2nd Level Menu Description Language 繁體中文 ∙ Users have to press the Middle Button to confirm and apply the Language setting. English ∙ Language is an independent setting. Users’ own Français language setting will override the factory default. When users set Reset to Yes, Language will not be changed.
Specifications Monitor PRO MP275 PRO MP275P Size 27 inch Curvature Flat Panel Type Resolution 1920x1080 (FHD) Aspect Ratio 16:9 SDR Brightness (nits) 1000:1 Contrast Ratio Refresh Rate 100Hz Response Time ∙ 1ms (MPRT) ∙ 4ms (GTG) ∙ HDMI™ Connector x1 ∙...
Page 19
Monitor PRO MP275 PRO MP275P Dimension (W x H x D) 612.1 x 456.8 x 207.2 mm 612.1 x 422.4 x 228.9 mm Weight 3.8 kg 5.4 kg Gross 5.9 kg 7.4 kg Environment Operating ∙ Temperature: 0℃ to 40℃...
Troubleshooting The power LED is off. • Press the monitor power button again. • Check if the monitor power cable is properly connected. No image. • Check if the computer graphics card is properly installed. • Check if the computer and monitor are connected to electrical outlets and are turned on.
∙ Place the power cord in a way that people are unlikely to step on it. Do not place anything on the power cord. ∙ If this device comes with an adapter, use only the MSI provided AC adapter approved for use with this device.
Page 23
∙ If any of the following situations arises, get the device checked by service personnel: • The power cord or plug is damaged. • Liquid has penetrated into the device. • The device has been exposed to moisture. • The device does not work well or you can not get it working according to the User Guide.
TÜV Rheinland Certification TÜV Rheinland Low Blue Light Certification Blue light has been shown to cause eye fatigue and discomfort. MSI now offers monitors with TÜV Rheinland Low Blue Light certification to ensure users’ eye comfort and well-being. Please follow the instructions below to reduce the symptoms from extended exposure to the screen and blue light.
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. MSI Computer Corp. 901 Canada Court, City of Industry, CA 91748, USA (626) 913-0828 www.msi.com...
Page 26
Vietnam RoHS As from December 1, 2012, all products manufactured by MSI comply with Circular 30/2011/TT-BCT temporarily regulating the permitted limits for a number of hazardous substances in electronic and electric products.