Table of Contents
Advertisement
User Manual 1260-64
Unpacking and
Inspection
Reshipment
Instructions
Option 01
Installation
INSTALLATION INSTRUCTIONS
1. Before unpacking the switching module, check the exterior of
the shipping carton for any signs of damage. All
irregularities should be noted on the shipping bill.
2. Remove the instrument from its carton, preserving the
factory packaging as much as possible.
3. Inspect the switching module for any defect or damage.
Notify the carrier immediately if any damage is apparent.
4. Have a qualified person check the instrument for safety
before use.
1. Use the original packing if it is necessary to return the
switching module to Racal Instruments for calibration or
servicing. The original shipping carton and the instrument's
plastic foam will provide the necessary support for safe
reshipment.
2. If the original packing is unavailable, wrap the switching
module in plastic sheeting and use plastic spray foam to
surround and protect the instrument.
3. Reship in either the original or a new, sturdy shipping carton.
Installation of the Option 01 into the 1260-64 is described in the
Installation section of the 1260-Series VXI Switching Cards
Manual. Note that lockout keying for the double-wide 1260-64
module differs from that described in the 1260 manual section.
Chapter 2
Installation Instructions 2-1
Advertisement
Table of Contents
