Universal Remote Control R7 Owner's Manual page 33

SECTION 4: Erasing МасгоРомег Commands
STEP 1: For erasing MacroPower commands on the POWER ON or
SVSTEM OFF button, press and hold either the POWER ON or
SYSTEM OFF button and the MUTE button simultaneously
for 3 seconds until the component LED light turns on.
SYSTEM OFF
Button 772 =< Button
MUTE
Button
IMPORTANT: If you don't press a button within 20 seconds, the
LED light will turn off and exit the set-up mode and you will need
to start over.
STEP 2: Press the CHANNEL UP button to erase and exit the Erase
mode. The component LED light will blink three times to confirm the
erasure.
31