Maintenance And Cleaning; Opening/Closing The Housing - Oase Filtral UVC 1500 Operating Instructions Manual

Maintenance and cleaning

NOTE
Do not use aggressive cleaning agents or chemical solutions. These agents can damage the
housing, impair the function of the device and harm animals, plants and the environment.
If possible, clean the unit with clear water and a soft brush or a sponge; remove stubborn dirt

with the aid of the recommended cleaning agents.

Clean the unit as required but at least twiceper year.
− When cleaning the pump, pay particular attention to the impeller unit and the pump
housing.
− Clean the inspection window with a cotton bud.

Opening/closing the housing

To clean and maintain the filter media, filter pump and UVC clarifier, you must open the device.
How to proceed:
 G
1. Release the clamps on the upper filter shell and remove the upper filter shell from the device.
2. Remove filter media.
Clean filter media
Prerequisite:
• Housing is opened. (→ Opening/closing the housing)
How to proceed:
1. Carefully clean the removed filter media using clean tap water.
2. Also clean the upper filter shell and the filter subshell carefully with clean tap water.
3. Reassemble the unit in the reverse order.
10