Related Manuals for Oase BioPress UVC 1000
Summary of Contents for Oase BioPress UVC 1000
- Page 1 BioPress UVC 1000 /1600 / 2400 Operating instructions Notice d’emploi Instrucciones de uso...
- Page 2 Information about these operating instructions Welcome to OASE Living Water. You made a great choice with the purchase of this product BioPress UVC 1000 / 1600 / 2400. Prior to operating the unit, please read the instructions of use carefully and fully familiarise yourself with the unit.
-
Page 3: Symbols Used In These Instructions
Important information for trouble-free operation. Intended use BioPress UVC 1000 / 1600 / 2400, referred to in the following as “unit”, may only be used as specified in the following: • For operation with clean water. • For mechanical and biological cleaning of garden ponds •... -
Page 4: Installation
- English - Installation Attention! Dangerous electrical voltage. Possible consequences: Death or serious injuries. Protective measures: • Only operate the unit with the protection hood fitted. • Ensure that the unit is installed water-tight with a safety distance from the water of a minimum of 6.6 ft (2 m). - Page 5 ○ Check all connections for leaks. 2. Switching off: Disconnect the power plug. BioPress 1000 Questions, problems, missing parts? Before returning to your retailer, call us at 1-866-627-3435, 8 a.m.-6 p.m., EST, Monday-Friday, or email us at customercare@oase-livingwater.com. Or visit our website at www.oase-livingwater.com...
-
Page 6: Maintenance And Cleaning
- English - Maintenance and cleaning Attention! Dangerous electrical voltage. Possible consequences: Death or serious injuries. Protective measures: • Electrical units and installations with a rated voltage of U > 12 V AC or U >30 V DC located in the water: Isolate the units and installations (switch off and disconnect from the power supply) before reaching into the water. - Page 7 ○ Perform a quick cleaning (Section: Quick cleaning). Questions, problems, missing parts? Before returning to your retailer, call us at 1-866-627-3435, 8 a.m.-6 p.m., EST, Monday-Friday, or email us at customercare@oase-livingwater.com. Or visit our website at www.oase-livingwater.com...
- Page 8 - English - Cleaning the quartz glass / Replacing the UVC lamp Attention! Ultra-violet radiation. Possible consequences: Eye or skin injury from burns Protective measures: • Never operate the UVC lamp outside its housing. • Never operate the UVC lamp in a housing that is defective Danger: Ultraviolet radiation.
- Page 9 ○ Refit the cover for the UVC pre-clarifying unit. Questions, problems, missing parts? Before returning to your retailer, call us at 1-866-627-3435, 8 a.m.-6 p.m., EST, Monday-Friday, or email us at customercare@oase-livingwater.com. Or visit our website at www.oase-livingwater.com...
-
Page 10: Wear Parts
- English - Storage/Winterization ● Pull out and replace the UVC lamp (Section: Replacing the UVC lamp). ● Put the unit out of operation at water temperatures below 46 °F (8 °C) or, at the latest, when freezing temperatures are to be expected.