Fp5 Receiver - Shure FP Series Manual

FP5 Receiver

① Power LED
Green
Yellow
Red
Flashing red on power up
② RF LED
Illuminates when successfully synced to a transmitter (or manually tuned to a transmitter's frequency)
③ Power Button
Press and hold to power on or off.
④ Infrared (IR) port
Sends infrared beam to synchronize frequencies.
⑤ Audio Output (TA3M) Jack
Use a TA3F cable to connect to a camera or audio device.
Caution: This device should not be connected to microphone inputs supplying phantom power, as this may negatively affect the audio signal.
⑥ Audio Output Gain
Power on
Low battery alert
Critical low battery, replace immediately
Battery dead
Shure Incorporated
11/26