Changing Settings - Miele H 2455 B Operating And Installation Instructions

Settings

Changing settings

You can use the  sensor control to
display the settings and personalise
your oven by adapting the factory
default settings to suit your
requirements.
You change a setting  by changing its
status .
 Turn the operating mode selector to 0
or to the Lighting  position.
 Select the  sensor control.

A list of settings will appear in the
display.
 Use the rotary selector   to select
the required setting.
 Confirm with OK.

The setting is called up and the current
status  appears, e.g. .
You can check settings or change them.
34


To change the status :
 Use the rotary selector   to select
the desired status.
 Confirm with OK.
The selected status is now saved and
the setting  appears again.
To change further settings, proceed in
the same way.
 Then select the  sensor control.