Setting Up The R&S Szm - R&S SZM Manual

®
R&S SZM
If class A equipment causes radio disturbances, take appropriate measures to
eliminate them.
5.3 Setting up the R&S SZM
The R&S SZM is used exclusively in test setups with a signal generator, e.g. the
R&S SMA100B.
To place the R&S SZM on a bench top
1. Place the R&S SZM on a stable, flat and level surface. Ensure that the sur-
face can support the weight of the R&S SZM. For information on the weight,
see the data sheet.
2. The top surface is not designed for stacking. If you want to stack the
R&S SZM together with other products:
a) Follow the instructions given for the other products.
b) Place the R&S SZM on top.
3. NOTICE! Overheating can damage the product.
Prevent overheating as follows:
● Keep a minimum distance of 3 cm between the fan openings at the side
panels of the R&S SZM and any object in the vicinity.
● Do not place the R&S SZM next to heat-generating equipment such as
radiators or other instruments.
4. The R&S SZM provides 4 adjustable feet, which you can mount on all sides of
the instrument. Adjust the screws of the feet to align the instrument horizon-
tally, that is parallel to the benchtop.
Manual 1179.3967.02 ─ 02
Preparing for use
Setting up the R&S SZM
16