Table of Contents
Advertisement
®
R&S
SZM
Figure 5-1: Positions for mounting the adjustable feet
Connect the R&S SZM to the other devices in the test setup as described in
Chapter 5.10, "Completing the test
5.4
Considerations for test setup
Cable selection and electromagnetic interference (EMI)
Electromagnetic interference (EMI) can affect the measurement results.
To suppress electromagnetic radiation during operation:
● Use high-quality shielded cables for the following connector types:
– SMA: RF cables that match this connector type.
See
Chapter 5.8, "Connecting to RF
– USB: double-shielded USB cables. The length of passive USB cables
must not exceed 1 m.
See
Chapter 5.7, "Connecting to
● Always terminate open cable ends.
Manual 1179.3967.02 ─ 02
setup",
on page 21.
In",
on page 20.
USB",
on page 19
Preparing for use
Considerations for test setup
17
Advertisement
Table of Contents
