Preparing For Use; Unpacking And Checking; Choosing The Operating Site - R&S SZM Manual

®
R&S SZM
5

Preparing for use

Here, you can find basic information about setting up the product for the first time.
5.1

Unpacking and checking

1. Unpack the R&S SZM carefully.
2. Retain the original packing material. Use it when transporting or shipping the
R&S SZM later.
3. Using the delivery notes, check the equipment for completeness.
4. Check the equipment for damage.
If the delivery is incomplete or equipment is damaged, contact
Rohde & Schwarz.
5.2

Choosing the operating site

Specific operating conditions ensure proper operation and avoid damage to the
R&S SZM and connected devices. For information on environmental conditions
such as ambient temperature and humidity, see the data sheet.
Electromagnetic compatibility classes
The electromagnetic compatibility (EMC) class indicates where you can operate
the product. The EMC class of the product is given in the data sheet.
● Class B equipment is suitable for use in:
– Residential environments
– Environments that are directly connected to a low-voltage supply network
that supplies residential buildings
● Class A equipment is intended for use in industrial environments. It can cause
radio disturbances in residential environments due to possible conducted and
radiated disturbances. It is therefore not suitable for class B environments.
Manual 1179.3967.02 ─ 02
Preparing for use
Choosing the operating site
15