Default Setup; Display - Tektronix TB1052B-EDU User Manual

Default Setup

Display

TBS1000B and TBS1000B-EDU Series Oscilloscopes User Manual
Push the Default Setup button to recall most of the factory option and control
settings, but not all. Appendix D lists the default settings that will be recalled.
Push the Utility button and Display side-menu selection to choose how
waveforms are presented and to change the appearance of the entire display.
Options Settings
Type Vectors, Dots
Persist Off, 1 sec, 2 sec,
5 sec, Infinite
Format YT, XY
Backlight 0 to 100%
Depending on the type, waveforms will be displayed in three different styles:
solid, dimmed, and broken.
Comments
Vectors fill the space between adjacent
sample points in the display
Dots display only the sample points
Sets the length of time each displayed
sample point remains displayed
YT format displays the vertical voltage in
relation to time (horizontal scale)
XY format displays a dot each time a sample
is acquired on channel 1 and channel 2
Channel 1 voltage or current determines the
X coordinate of the dot (horizontal) and the
channel 2 voltage or current determines the
Y coordinate (vertical)
Use the Multipurpose knob to adjust the
display backlight.
Reference
81