KTM 150 EXC 2023 Setup Instructions page 21

3.4 Mounting the seat
3.5 Installing the shock absorber
–
Mount the front of the seat on the two collar bushings of the
fuel tank, lower the seat at the rear, and push the seat forward.
–
Make sure the seat is latched in place correctly.
H02218-11
–
Mount and tighten screw
Guideline
Screw, seat fixing
S03480-10
Main work
–
Push splash protector
absorber. Mount and tighten screw
Guideline
Screw, top
shock absorber
–
Mount and tighten screw
Guideline
S03615-11
Screw, bottom
shock absorber
Info
The heim joint for the shock absorber on the link fork
is Teflon coated. It must not be lubricated with grease,
nor with any other lubricants. Lubricants dissolve the
Teflon coating, thereby drastically reducing the service
life.
Finishing work
–
Remove the motorcycle from the lift stand. (
1
on the left side.
M6 10 Nm (7.4 lbf ft)
1
to the side and position the shock
2
.
M12 80 Nm (59 lbf ft)
Loctite
3
.
M12 80 Nm (59 lbf ft)
Loctite
p. 18)
WORK 3
® 2701™
® 2701™
19