Table of Contents
Advertisement
The Mode menu does not appear
• Check whether the operation switch lock function is active (see
Switches
[} 16]).
The operation switches do not work
• Check whether the operation switch lock function is active (see
Switches
[} 16]).
• Check whether there are any water droplets or foreign objects on the switch surface.
Gently wipe the switch surface and try operating the switches again with dry hands.
• Are you wearing gloves? If so, remove the gloves and try operating the switches again
with dry hands.
The monitor connected using the USB cable is not detected or the USB
device (peripheral) connected to the monitor does not work
• Check whether the USB cable is connected correctly (see
[} 24]).
• Try using a different USB port on the PC.
• Try changing to a different USB port on the monitor.
• Reboot the PC.
• If the peripheral devices work normally when directly connected to the PC, contact your
dealer or local EIZO representative.
• Check whether the PC and OS are USB compliant. (Contact the manufacturer of each
device for information about USB compatibility.)
• Check the PC's BIOS setting for USB when using Windows. (Refer to the User's Manual
of the PC for details.)
RadiCS fails to connect to the monitor
• Check that the USB cable is not pulled out.
Troubleshooting | 5
Locking Operation
Locking Operation
Using the USB Hub Function
21
Advertisement
Table of Contents
