Eizo LMM56800 Instructions For Use Manual page 53

Function
Keyboard/mouse set‐
tings
LMM56800
Instructions for Use, 02/2014
Description
Video input
The correct video input for which the instance is created already ap‐
pears as default. To assign the same settings to a different video input,
use the drop down list.
Default setting: The selected video input
Instance enabled
The currently selected instance can be disabled here so that it is no lon‐
ger visible. If the instance was assigned to a window, the following sym‐
bol appears in the window:
Default setting: "Instance enabled" is set (instance is visible)
Keep aspect ratio
This property should always be enabled. The aspect ratio of the con‐
nected video source is then retained. . If this property is disabled, the
aspect ratio of the window in which the instance is displayed is used.
This can result in image distortion.
Default setting: "Keep aspect ratio" is set .
Create/delete miniature thumbnail
A miniature thumbnail can be created for each instance. The thumbnail
appears in both the "Input configuration" (bottom) and "Instance" (top)
sidebars.
1. Click . The "Miniature thumbnail" dialog box opens.
2. Move the marker
the thumbnail.
3. Confirm with "OK". The thumbnail is applied.
Note: Alternatively, you can load a symbol, for example from a USB
stick. Click .
4. To delete the thumbnail, click
Synchronize output
Enables input/output synchronization.
Note
If synchronization is enabled for multiple inputs, the instance with the
lowest channel number is synchronized for the video input.
Not available for LMM56800 .
Configuration and operation
6.8 "Input configuration" sidebar
, , , to select the suitable cropping area for
.
53