Eizo LMM0804 Instructions For Use Manual
  1. Manuals
  2. Brands
  3. Eizo Manuals
  4. Server
  5. LMM0804
  6. Instructions for use manual
Eizo LMM0804 Instructions For Use Manual

Eizo LMM0804 Instructions For Use Manual

Large monitor manager
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Instructions for Use
Large Monitor Manager
Important
Please read the safety information and all information delivered
with the product carefully to familiarize yourself with safe and
effective usage.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LMM0804 and is the answer not in the manual?

Questions and answers

Related Manuals for Eizo LMM0804

Summary of Contents for Eizo LMM0804

  • Page 1 Instructions for Use Large Monitor Manager Important Please read the safety information and all information delivered with the product carefully to familiarize yourself with safe and effective usage.

  • Page 2: Legal Information

    Note the following: WARNING EIZO products may only be used for the applications described in the catalog and in the relevant tech- nical documentation. If products and components from other manufacturers are used, these must be recommended or approved by EIZO. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.

  • Page 3: Table Of Contents

    Input signals...................... 29 6 Configuring ........................ 31 Definition of terms.................... 31 Basic icons...................... 33 Procedure for setting up the Large Monitor Manager .......... 35 Setting up remote access .................. 36 Overview of the sidebars .................. 37 "Base settings" (abbreviated) sidebar .............. 38 LMM0804 Instructions for Use, 12/2014...
  • Page 4 7 Operation.........................  83 Operating with control monitor CID1000P .............. 84 Operating with the web browser ................ 86 Running an application ................... 88 8 Cleaning and maintenance ....................  89 Cleaning........................ 89 Maintenance ...................... 90 9 Troubleshooting ...................... 91 Error messages ...................... 91 Troubleshooting ...................... 92 LMM0804 Instructions for Use, 12/2014...
  • Page 5 13.2 Markings and symbols .................. 103 13.3 Warranty ....................... 104 13.4 Repairs ......................... 104 13.5 Environmental protection .................. 104 13.6 China RoHS (Restriction of Hazardous Substances) ........... 105 13.7 Accessory devices .................... 107 13.8 Trademarks...................... 107 13.9 Contact ......................... 107 Index .......................... 108 LMM0804 Instructions for Use, 12/2014...

  • Page 6: Introduction

    This document explains the functionality and the approved use of the Large Monitor Man- ager LMM0804. To ensure clarity, it does not contain all detailed information on this product. The contents of this document are neither part of a previous or existing agreement, commit- ment or legal relationship, nor does it modify such.

  • Page 7: Safety Notes

    2.1 General safety notes Correct transport, professional storage, installation and connection, as well as careful opera- tion and maintenance, are required to ensure that the EIZO devices operate safely and cor- rectly. The devices may only be used for applications for which they are commonly used.
  • Page 8 Touching the components may be fatal. No contact between device and patients The device is not suitable for direct contact with patients. Device and patient must never be touched simultaneously. Otherwise there is a danger to life and limb. LMM0804 Instructions for Use, 12/2014...
  • Page 9 Connection in China Only use power cables approved for China. These power cables are identified by the labels "CCC" or "CQC". Observe the country-specific regulations Observe all regulations of the country in which the device is used. LMM0804 Instructions for Use, 12/2014...
  • Page 10 If the device is brought into a room with a higher or rising temperature, condensed water will form in and on the device. Do not switch on the device until the condensed water has evaporated. Otherwise the device could be damaged. LMM0804 Instructions for Use, 12/2014...
  • Page 11 Note that monitors can fail as a result of aging, and that image properties such as brightness, con- trast, and color value can change. Do not touch the monitor screen Due to mechanical pressure or electrostatic discharging, touching the screen can result in brief dis- turbances to the image. LMM0804 Instructions for Use, 12/2014...

  • Page 12: Product-Specific Safety Notes

    It is the user's responsibility to protect this system against viruses and attacks from the Internet or other devices in this system LMM0804 Instructions for Use, 12/2014...

  • Page 13: Description

    Keep the packaging material for subsequent transport of the device. Device Product Order No. Description Large Monitor Manager 6GF60301AB10 The LMM0804 can operate up to five moni- LMM0804 (ES, EU, CN) tors simultaneously. The following output res- olutions are possible: • 1920 x 1080 @ 60Hz (FHD) •...

  • Page 14: Correct Usage

    The device is suited for use in a medical environment. It can be used as a desktop device or installed in a rack. 3.3 Features The Large Monitor Manager LMM0804 has the following features that permit a wide area of applications: Flexible arrangement of different video sources With the LMM0804 you can simultaneously display up to eight different video sources on one to five monitors.

  • Page 15: Plate And Label Layout (Examples)

    Description 3.4 Plate and label layout (examples) User-defined layouts The user can arrange the layout required on the LMM0804 and select the layout suitable for a given application. View Management With View Management, you can assign and modify a predefined layout for each monitor. Display of analog and digital signals The inputs of the LMM0804 can process both analog and digital image signals in resolutions from VGA(640 x 480 at 60 Hz), to WUXGA (1920 x 1200 at 60 Hz), to QXGA (2048 x 1536...
  • Page 16 Description 3.4 Plate and label layout (examples) Additional plate Packaging label LMM0804 Instructions for Use, 12/2014...

  • Page 17: Setup And Installation

    4 Setup and installation CAUTION Changes to device Do not make any mechanical or electric changes to the device. EIZO GmbH is not liable for changes made to the device. 4.1 Installation location NOTICE Area surrounding the installation location Protect the device from: •...

  • Page 18: Positioning As A Desktop Device

    4.2 Positioning as a desktop device 4.2 Positioning as a desktop device The LMM0804 can be used as a desktop device in vertical or horizontal position. Make sure the surface where it is to be placed is solid and even. An optional cable holder is available to route the cable cleanly and provide strain relief.
  • Page 19 • The device must be installed so that the main switch, the plug connector, and the con- nection panel are accessible to the user. If this is not the case, an additional element ensuring access has to be installed. The installation has to comply with applicable safety standards. LMM0804 Instructions for Use, 12/2014...

  • Page 20: Installing The Transmission Modules

    Setup and installation 4.4 Installing the transmission modules 4.4 Installing the transmission modules The scope of delivery for the LMM0804 contains two transmission modules (TDL0000- T2SL) for connecting a maximum four monitors. ① DVI connection plug ④ EMC pad ② Allen screws ⑤ EMC holder ③ RJ45 socket for connecting the signal cables Attach to the Large Monitor Manager 1.

  • Page 21: Installing Link Sets

    Note To make it easier to allocate the 36 m or 23 m signal cable when connecting to the monitor and the LMM0804, you can mark the cables with the color clips included with the link set. LMM0804 Instructions for Use, 12/2014...

  • Page 22: Installing The Emc Pad On A Signal Cable

    2. Attach this combination to the transmission or receiver module until the safety catch in the base of the RJ45 locks in: Example: Installed EMC pad LMM0804 Instructions for Use, 12/2014...

  • Page 23: Connecting

    Follow all shielding measures according to the country-specific EMC Directive. If these guidelines are not observed, device malfunction may result. NOTICE Disconnecting from line power Always set the power switch to "Off" before disconnecting the device from power. Other- wise the device could be destroyed. LMM0804 Instructions for Use, 12/2014...

  • Page 24: Connection Panel

    ① PE connection Additional protective conductor connection ② PS2 socket For service purposes (at EIZO) (6x Mini-DIN connectors) X1 … X6 USB Type A: Downstream For external USB devices such as keyboard, mouse, etc., with a maximum connection value of 5 V and 500...

  • Page 25: Monitor Options

    Switching on / switching off the device 5.3 Monitor options The LMM0804 supports various output resolutions. The selected output resolution applies to all monitors, which means that only one output resolution can be used in operation. The following output resolutions are available:...

  • Page 26: Connection Procedure

    TDL3600-R90 or TDL2300-R90, monitors can be con- nected at a distance of up to 36 m (23 m) from the LMM0804. You need two link sets if you want to connect three or four monitors.

  • Page 27: Connecting The Video Source Computer

    "Input and output configuration" sidebar [} 59] 5.4.2 Connecting the video source computer To operate a video source using the Large Monitor Manager, the LMM0804 has to be con- nected to the video source computer via USB. Proceed as follows for each computer to be connected: 1.

  • Page 28: Connecting To The Network

    2. Connect the standard power cable for your country, which is included in the scope of de- livery, to the "Power Input" connection panel. 3. Switch on the device. ð The device is operational when the LEDs illuminate green. The LMM0804 has to be configured the first time it is used. See also Configuring [} 31] LMM0804...

  • Page 29: Input Signals

    • However, only one video signal from a can be displayed in a layout. If an attempt is made to display two video signals from the same group in a layout, the channel with the higher number is hidden and the following symbol appears: LMM0804 Instructions for Use, 12/2014...
  • Page 30 5.5 Input signals Image refresh rates Any image refresh rates can be set for inputs. EIZO recommends a refresh rate of 60 Hz because the video output signal on the LMM0804 has an image refresh rate of 60 Hz. Video bandwidth Note...

  • Page 31: Configuring

    Configuring 6.1 Definition of terms 6 Configuring The first time the LMM0804 is switched on is the first time the device is configured for use. The following two methods are available for configuration, depending on the application: • Configuration via network for remote operation: –...
  • Page 32 (ALT + Space key is the default setting). Remote access Operation of the LMM via LAN or WLAN. View Management (VM) Sets the image content for the connected monitors using a workstation or the control monitor with an EIZO touchscreen. LMM0804 Instructions for Use, 12/2014...

  • Page 33: Basic Icons

    Using Drag & Drop, a window in the current layout can be exchanged with another window. Selecting parameters in various menus. Please wait. The Large Monitor Manager is busy processing the selected function and cannot process additional input. LMM0804 Instructions for Use, 12/2014...
  • Page 34 The selected instance cannot be used because another instance of the group is active. The miniature thumbnail of the instance has not yet been configured or was deleted. The miniature thumbnail of the instance cannot be displayed. LMM0804 Instructions for Use, 12/2014...

  • Page 35: Procedure For Setting Up The Large Monitor Manager

    Via a workstation with a network browser (remote). Remote access is possible via LAN and WLAN. Note: Access via WLAN requires an additional access box or receiver module. Proceed as follows to set up the LMM0804 : 1. Connect the monitor or monitors. 2. Connect the keyboard and mouse.

  • Page 36: Setting Up Remote Access

    Type of operation To prevent conflicts during operation, the Large Monitor Manager (LMM) should be oper- ated either locally or via remote access. EIZO recommends that you decide on one type of operation to use. To establish remote access for the first time, various settings have to be made on the basis of the type of connection in the network.

  • Page 37: Overview Of The Sidebars

    To check some settings, it may be necessary to review the changes made on the original image. This is particularly important with the function "Graph optimized scaling". 6.5 Overview of the sidebars ① "Base settings" (extended) sidebar ② "Input configuration" sidebar ③ "Layout" sidebar ④ "Instances" sidebar LMM0804 Instructions for Use, 12/2014...

  • Page 38: Base Settings" (Abbreviated) Sidebar

    You can do the following in the "Base settings (abbreviated)" sidebar: • Display general system information. • Change the default language. • Log in as "Administrator" or "Default user with extended rights". • Restart and shut down the Large Monitor Manager. LMM0804 Instructions for Use, 12/2014...

  • Page 39: Displaying Up System Information

    Indicator Description Device information Information on the hardware and software versions of the LMM0804. Monitor @ Monitor NM Information on connected Monitor NM. N stands for 1 or 2, M for A or B, based on the designations on output connections 1A, 1B, 2A, 2B.

  • Page 40: Changing The Language Setting

    Continue clicking until the language required is displayed. Note The default language is displayed each time the LMM0804 starts. To change the default language you have to be logged in as the administrator and change the language in the Settings dialog window.

  • Page 41: Restarting Or Shutting Down

    Wake on Lan. The required software has to be installed on the PC used for switching on, and configured according to the network address of the LMM. LMM0804 Instructions for Use, 12/2014...

  • Page 42: Base Settings" (Extended) Sidebar

    In the "Base settings" (extended) sidebar you can perform basic settings, such as establish- ing the common appearance, selecting the font color, setting the network, or updating the firmware. To open the "Base settings" (extended) sidebar , move the mouse pointer to the right edge of the screen. LMM0804 Instructions for Use, 12/2014...

  • Page 43: Settings

    In the event of a system logjam, a reboot is activated automatically and the system is returned to the preset, ready-to-operate state. Default setting: Watchdog is enabled. DDC enabled The monitor information is read via the DDC channel. This process can be deactivated. Default setting: DDC is enabled. LMM0804 Instructions for Use, 12/2014...
  • Page 44 Language selection: German, English, French, or Japanese Default setting: English Keyboard mapping Define the keyboard mapping here. Click to make the setting. Available keyboard mappings: QWERTZ (German keyboard), QWERTY (US English keyboard) or AZERTY (French keyboard) Default setting: QWERTY (US) LMM0804 Instructions for Use, 12/2014...
  • Page 45 In this case, the mouse pointer moves only within the limits of the window. You are in "Focused Mode" To go back to Overlay Mode, use the "keys to exit the active win- dow". Default setting:  LMM0804 Instructions for Use, 12/2014...

  • Page 46: Workspace Settings

    6.7.2 Workspace settings A user can work on up to four monitors, depending on how the application for the LMM0804 is configured. Or, multiple users can work on multiple monitors. Note the table in chapter Monitor options.
  • Page 47 Nothing has to be configured under the workplace settings. Example 2: No applications run on the monitors • Switch the image content via remote access using the CID1000P for example. • Maximum three inputs per layout. LMM0804 Instructions for Use, 12/2014...
  • Page 48 • If layouts are deleted on one workspace, they are also no longer available on the other workspaces. • A separate default layout can be established for each workspace. • A default layout cannot be deleted. LMM0804 Instructions for Use, 12/2014...
  • Page 49 2 workspaces: One user with one or two monitors or two users with one or two monitors each. • 3 workspaces: Two users with one monitor each and one user with one or two monitors. • 4 workspaces: Four users with one monitor each Default setting: 1 workspace: LMM0804 Instructions for Use, 12/2014...

  • Page 50: Setting The Network Connection

    . 6.7.3 Setting the network connection To set the network connection, click the "Network settings" button in the "Base settings" (ex- tended) sidebar. The "Network settings" dialog window opens. LMM0804 Instructions for Use, 12/2014...
  • Page 51 Default setting: 1500 Default setting: IP address 10.1.1.104 Server Information about the server the Large Monitor Manager will access when the firmware should be updated or configuration data stored (see also dating firmware [} 55], Backup/Restore [} 56]). LMM0804 Instructions for Use, 12/2014...

  • Page 52: Changing The Password

    6.7 "Base settings" (extended) sidebar  6.7.4 Changing the password Two passwords are assigned as default for the LMM0804. For the administrator ("Service") the password "super" and for the user with advanced rights B ("Advanced") the password "plus". If you want to change one of these passwords you have to log on either as adminis- trator or as user with advanced rights.
  • Page 53 Rights The following rights are assigned to the roles "Default user" and "Default user with extended rights". The administrator has all rights. Note Assigning rights Only the administrator can change the rights assigned to roles. LMM0804 Instructions for Use, 12/2014...

  • Page 54: Setting The System Time

    If an NTP server is not used, you can set the system time as follows: 1. Incrementally change the date and time with the arrow keys until the required values are displayed. 2. Click "OK". 3. Restart the device to apply the changes. LMM0804 Instructions for Use, 12/2014...

  • Page 55: Updating The Firmware

    An interrupted firmware update can result in device failure. • Perform a firmware update in consultation with your local distributor or on the recom- mendation of EIZO only. • Only use firmware updates released by EIZO to ensure proper function of the Large Monitor Manager. Note Save the user-defined settings before starting the firmware update.

  • Page 56: Backup/Restore

    Click "Browse" and set the storage location and name of the file. Click "OK" to perform the backup. The user data are backed up to a ZIP file. A corresponding mes- sage appears when the backup is complete. LMM0804 Instructions for Use, 12/2014...

  • Page 57: Creating A Logbook

    Setting the network connection [} 50] 6.7.9 Creating a logbook Note The information in the logbook is only intended for EIZO support personnel, and can only be evaluated by specialists from EIZO. To create the logbook for EIZO support : 1. Click the "Logbook" button in the "Basic settings" (extended) sidebar.

  • Page 58: View All Inputs

    Inputs IN1 - IN6 are all displayed simultaneously in 6 windows. The information banner in these windows is blue. • Inputs IN7.1-IN7.4/IN8.1-IN8.4 are displayed in sequence for approx. 5 seconds. The in- formation banner is blue when the input is displayed; otherwise, it is dark blue. LMM0804 Instructions for Use, 12/2014...

  • Page 59: Input And Output Configuration" Sidebar

    The required LUT and associated brightness can be set for the monitor. Note: Monitor 3 assumes a special setting. Here you can configure which signal should be sent to this output. LUT and brightness cannot be set. LMM0804 Instructions for Use, 12/2014...

  • Page 60: Configuring Video Outputs

    The message "No information" is displayed for an input with information that cannot be read . 6.8.1 Configuring video outputs You can enable or disable video outputs as needed for the LMM0804. Monitor outputs 1A to 2B Enable or disable the monitor outputs for 1A to 2B as follows: 1.

  • Page 61: Configuring Digital Video Inputs

    4. Click "OK". 6.8.2 Configuring digital video inputs If you double-click the digital video input IN1 through IN6 or IN7.3 / IN8.3 that is to be config- ured, the "Video input configuration" dialog window is displayed. LMM0804 Instructions for Use, 12/2014...
  • Page 62 You establish the link of the video source with a USB-B connector here. Without this setting, the video source cannot operate with the mouse and keyboard. Click , to assign the USB-B connector. Note: Use the notes made during connection (chapter Connecting the video source computer [} 27]). LMM0804 Instructions for Use, 12/2014...

  • Page 63: Configuring Analog Video Inputs

    The dialog window will have a different layout, depending on the input type. Configuring VGA and DVI-A video inputs The following "Video input configuration" dialog window is displayed for VGA (IN7.1, IN8.1) and DVI-A (IN7.4, IN8.4) inputs: LMM0804 Instructions for Use, 12/2014...
  • Page 64 To do so, a test pattern with the correct resolution must be displayed in the video source. The test pattern can be generated by the LMM0804. Click the "Test pattern" button. Save the generated image on a USB memory stick.
  • Page 65 The ADC parameters can be set automatically. To do so, a test pattern with the correct resolution must be displayed in the video source. The test pattern can be generated by the LMM0804. Click the "Test pattern" button. Save the generated image on a USB memory stick.
  • Page 66 Configuring 6.8 "Input and output configuration" sidebar  Configuring S-video inputs The following "video input configuration" dialog window is displayed for S-video inputs IN7.2 and IN8.2. LMM0804 Instructions for Use, 12/2014...
  • Page 67 , to assign the USB-B connector. Note: In this case use the notes made during connection (chapter Con- necting the video source computer [} 27]). Without this setting, the video source cannot operate with the mouse and keyboard. LMM0804 Instructions for Use, 12/2014...

  • Page 68: Configuring An Extended Window

    The video signals of the video source are connected to inputs IN1, IN2, and IN3. In the "Video input configuration" dialog window, USB port "XB" has to be entered under "USB in- put" for each video input. ① ② Video signal 1 ③ Video signal 2 ④ Video signal 3 LMM0804 Instructions for Use, 12/2014...

  • Page 69: Creating And Configuring Instances

    1. Left-click the video input ① for which an instance should be configured. 2. To configure an instance, double-click the miniature thumbnail of the instance ②. Note: Alternatively, click The "Instance configuration of a video input" dialog window is displayed. LMM0804 Instructions for Use, 12/2014...
  • Page 70 Video input The correct video input for which the instance is created already appears as de- fault. To assign the same settings to a different video input, click . The video input is selected. Default setting: The selected video input. LMM0804 Instructions for Use, 12/2014...
  • Page 71 Configuring digital video inputs Configur- ing analog video inputs. If operation with the mouse / keyboard (Focused Mode) is unnecessary for a video source, the function can be deactivated here. Default setting: "Enable mouse" is set. "Enable keyboard" is set. LMM0804 Instructions for Use, 12/2014...
  • Page 72 • If "Graph optimized scaling" is used in two windows in a layout, the windows must be placed on the right and left half of the monitor and may not extend beyond the center. Default setting: "Graph optimized scaling" is not set. LMM0804 Instructions for Use, 12/2014...
  • Page 73 Color tolerance If various dialog windows / menus present slight color variations (such as white to light gray), you can have both colors detected as dialog window / menu by in- creasing the color tolerance. Default setting: 0.0 (no tolerance) LMM0804 Instructions for Use, 12/2014...
  • Page 74 Direct selection of the border in thumbnail You can define the sides on which a border is to be displayed. To do this, click on the individual border sides in the thumbnail. Default setting: complete border. See also Configuring digital video inputs [} 61] LMM0804 Instructions for Use, 12/2014...

  • Page 75: Layout" Sidebar

    Description Resets the user-defined settings in all layouts to the original values. This is only possible if the settings have not already been saved. Saves the user-defined settings in all layouts. Creates a new layout. LMM0804 Instructions for Use, 12/2014...

  • Page 76: Edit Layouts

    2. To edit an existing layout, click the layout to be changed in the sidebar. The following toolbar is displayed next to the layout: 3. Click the button to edit the layout directly or click to duplicate the existing layout and then edit it. LMM0804 Instructions for Use, 12/2014...

  • Page 77: Editing The Window In The Selected Layout

    Opens the menu for editing the instance in this window. The size of the window cannot be changed if the pin is set. It can only be deleted or shifted, and the created instance in this window can be edited. LMM0804 Instructions for Use, 12/2014...
  • Page 78 The zero position is the top left corner of the displayable screen area. Click the field and enter the values required for the horizontal and vertical positions. Saving changes • Click the button in the "Layout" sidebar to save all changes in all layouts. LMM0804 Instructions for Use, 12/2014...

  • Page 79: Instances" Sidebar

    5. Save the layout in the "Layout" sidebar by clicking in the "Layout" sidebar. Note The configuration is retained when switching between layouts. If the settings are not saved, they are lost if you reboot or shut down the LMM0804. LMM0804 Instructions for Use, 12/2014...

  • Page 80: Status Window

    LMM status. 6.12 Screenshot function The LMM0804 has a screenshot function. To create a screenshot, the procedure is similar to that done with Microsoft Windows. Creating a screenshot Proceed as follows: 1.
  • Page 81 Proceed as follows: 1. Click the button. 2. Select a storage location. 3. Enter a file name using the keyboard. Do not use special characters. 4. Click "OK". The dialog window closes and the file is saved. LMM0804 Instructions for Use, 12/2014...

  • Page 82: Information For Developers

    Saving the device configuration on memory media external to the Large Monitor Man- ager • Reading the log file • Saving the current screen content • Displaying text fields Software distribution is available from EIZO. Contact your local distributor with any ques- tions. LMM0804 Instructions for Use, 12/2014...

  • Page 83: Operation

    Operation 6.13 Information for developers 7 Operation After configuring the Large Monitor Manager LMM0804, operation is limited to the following applications: • Changing layouts in a workspace. • Assigning instances in layouts and workspaces. • Running an application displayed on one of the monitors...

  • Page 84: Operating With Control Monitor Cid1000P

    Operation 7.1 Operating with control monitor CID1000P 7.1 Operating with control monitor CID1000P You can make various changes on the LMM0804 depending on the user interface dis- played. • You can change layouts if the start address equals "<IP address of the LMM0804>". • If the start address equals "<IP address of the LMM0804>/VM", View Management opens and you can also assign instances.
  • Page 85 2. Click the window where the instance should be used. The instance is assigned immediately. Note Change the layout You can also change layouts in View Management: • Click the required layout. • Click the workspace where the layout is to be used. LMM0804 Instructions for Use, 12/2014...

  • Page 86: Operating With The Web Browser

    Change the layout in a workspace. To switch the layout with the web browser: 1. In the address line of the web browser enter "<IP address of the LMM0804>" . The standard interface opens. 2. Click the arrow next to the Workspace indicator ②.
  • Page 87 You can also change layouts in View Management: • Click the required layout, such as ③. • Click the workspace where the layout is to be used. Note Drag & Drop The described functions can also be executed using Drag & Drop. LMM0804 Instructions for Use, 12/2014...

  • Page 88: Running An Application

    Running an application means active communication with a PC application, such as patient data entry or running a system. For this, a keyboard and mouse have to be connected to the LMM0804. To access the application, the PC has to be connected to an input and configured as the video source.

  • Page 89: Cleaning And Maintenance

    Morning Mist Surfanios Fraicheur Citron (Anios Labs) Guanidine derivatives Lysoformin Quaternary compounds Incidur spray, undiluted Standard household dish de- denk mit Fairy Ultra, Pril, Palmolive tergent Pyridine derivatives Activ spray, undiluted Water Tap water Distilled water LMM0804 Instructions for Use, 12/2014...

  • Page 90: Maintenance

    Cleaning the fans The device is equipped with fans. Depending on the environment, these may become dirty. The fans may only be cleaned by EIZO. Ensure that the vents are unobstructed. Ensure that the vents for air intake and exhaust are not covered.

  • Page 91: Troubleshooting

    Status window Specific hardware faults are indicated in the status window by a flashing red border. The status window is displayed if you move the mouse pointer in the lower right corner of the screen. LMM0804 Instructions for Use, 12/2014...

  • Page 92: Troubleshooting

    If the fans do not work (0.0 rpm): Return for re- pair necessary Video bandwidth Monitors the overall video No action necessary, it is performed automati- bandwidth cally by the Large Monitor Manager LMM0804. (informational display) See also Input signals. 9.2 Troubleshooting Problem Possible cause...

  • Page 93: Technical Specifications

    1368 x 768 @ 60 Hz Number of digital outputs [DVI single link] [165-  MHz] Interfaces Ethernet interface 1 [1 Gbit/s] PS/2 interface (for service purposes only) USB Type A (downstream) USB Type B (upstream) LMM0804 Instructions for Use, 12/2014...

  • Page 94: Power Supply

    100 V - 240 V, 50 Hz - 60 Hz Current consumption 1.5 A - 0.7 A Note The LMM0804 has power supply outputs. The actual current consumption depends on the number of additional loads. The following list contains the individual consumption values. • Typical power consumption: 50 W •...

  • Page 95: Mechanical Requirements

    2004/108/EC, 2006/95/EC, and 2011/65/EU. Safety standards IEC/EN 60601-1 (Second Edition) IEC/EN 60601-1 (Third Edition) CAN/CSA - C22.2. No. 601.1-M90 CAN/CSA - C22.2. No. 60601-1-08 Protection class Protection class I Degree of protection IP20 in accordance with DIN 40050 LMM0804 Instructions for Use, 12/2014...

  • Page 96: Electromagnetic Compatibility

    8 kV air, 6 kV contact RF irradiation EN 61000-4-3 80 MHz ... 2.5 GHz, 3 V/m 80 % AM 1 kHz Constant magnetic fields EN 61000-4-8 Alternating magnetic fields 4000 Aeff/m (maximum) 1000 Aeff/m (maximum) Line reaction to harmonics EN 61000-3-2 Line reaction to voltage fluctuations EN 61000-3-3 LMM0804 Instructions for Use, 12/2014...

  • Page 97: Dimensioned Drawings

    Dimensioned drawings 11.1 LMM without brackets 11 Dimensioned drawings All dimensions in mm 11.1 LMM without brackets LMM0804 Instructions for Use, 12/2014...

  • Page 98: Lmm With Center Brackets

    Dimensioned drawings 11.2 LMM with center brackets 11.2 LMM with center brackets 11.3 LMM with front brackets LMM0804 Instructions for Use, 12/2014...

  • Page 99: Cable Strain Relief

    11.4 Cable strain relief View when not installed View when installed on the Large Monitor Manager Use the screws provided to attach to the LMM0804. For undertable installation, the cable holder also has to be secured on both front brackets. Note Cable ties, 3 mm in width, can be used to attach the cables.

  • Page 100: Spare Parts / Accessories

    TDL2300-R90: Two 23 m signal cables, two receiver modules, two power supplies, and additional components (EMC pad and holder, 1 m patch cable, color chips). Monitor For the LMM0804, we recommend using the monitors listed in chapter Monitor options [} 25]. These monitors support the resolutions required and have been tested and released for use with the LMM0804.
  • Page 101 Spare parts / accessories 12.1 Accessories Breakout cable, 1 MDR on 7 jacks Power supply adapter for up to seven external devices, such as optical transmission links. Additional accessories • DVI-D to HDMI signal cable. • DVI to HDMI conversion adapter. LMM0804 Instructions for Use, 12/2014...

  • Page 102: Appendix

    13.1 Guidelines and manufacturer's declaration – electromagnetic emissions The Large Monitor Manager LMM0804 is intended for use in the environment specified be- low. The customer or the user of the device should ensure that it is used in such an environ- ment.

  • Page 103: Markings And Symbols

    (name plate) Symbol for alternating current at line voltage input. (name plate). Symbol for protective ground (protective conductor connection "On" symbol (voltage) (power switch) "Off" symbol (voltage) (power switch) Input for service calls. (PS2 socket) LMM0804 Instructions for Use, 12/2014...

  • Page 104: Warranty

    Comply with all local requirements and laws pertaining to the disposal of devices. The device is in compliance with directive 2011/65/EU for limiting the use of specific haz- ardous materials in electric and electronic devices. LMM0804 Instructions for Use, 12/2014...

  • Page 105: China Rohs (Restriction Of Hazardous Substances)

    Appendix 13.6 China RoHS (Restriction of Hazardous Substances) 13.6 China RoHS (Restriction of Hazardous Substances) LMM0804 Model: 6GF60301AB## (##=00 - 99) 根据SJ/T11364-2006《电子信息产品污染控制标识要求》特提供如下有关污染控制方面的信 息。 The following product pollution control information is provided according to SJ/T11364-2006 Marking for Control of Pollution caused by Electronic Information Products. 电子信息产品污染控制标志说明 Explanation of Pollution Control Label 该标志表明本产品不含有超过中国标准SJ/T11363- 2006《电子信息产品中有毒有害物...
  • Page 106 Applications of hazardous substances in this medical device are required to achieve its intended clinical uses, and/or to provide better protection to human beings and/or to environment, due to lack of reasonably (economically or technically) available substitutes. 产品中有毒有害物质或元素的名称及含量 Table of hazardous substances’ name and con- centration. LMM0804 Instructions for Use, 12/2014...

  • Page 107: Accessory Devices

    Connected devices such as PCs must meet the relevant safety standards. 13.8 Trademarks EIZO Logo is a registered trademark of EIZO Corporation in Japan and other countries. EIZO is a registered trademark of EIZO Corporation in Japan and other countries.

  • Page 108: Index

    Error message  91 Remote  31 Order No.  13 Factory setting  56 Fan cleaning  90 Password  40, 52 Firmware Update  55 Power connector  28 Power supply  28 Product-specific safety notes  12 General safety notes  8 Guidance  102 LMM0804 Instructions for Use, 12/2014...
  • Page 109 Base settings (abbreviated)  38 Input configuration  59 Instances  79 Layout  75 Overview  37 Status window  80, 91 Synchronization  34, 71 System information  39 System time  54 Transmission module  20 Troubleshooting  92 User data  56 User rights  52 LMM0804 Instructions for Use, 12/2014...
  • Page 110 Siemensallee 84 76187 Karlsruhe Germany Instructions for Use, 12/2014 LMM0804 1050367-002 Copyright © 2014 EIZO GmbH. All rights reserved.

This manual is also suitable for:

Lmm08026gf6030-1ab006gf60301ab10

Table of Contents