Eizo LMM0801 Instructions For Use Manual
  1. Manuals
  2. Brands
  3. Eizo Manuals
  4. Server
  5. LMM0801
  6. Instructions for use manual
Eizo LMM0801 Instructions For Use Manual

Eizo LMM0801 Instructions For Use Manual

Large monitor manager
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Instruction for Use 05/2013
display
SOLUTIONS

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LMM0801 and is the answer not in the manual?

Questions and answers

Related Manuals for Eizo LMM0801

Summary of Contents for Eizo LMM0801

  • Page 1 Instruction for Use 05/2013 display SOLUTIONS...
  • Page 3 ___________________ _Large Monitor Manager LMM0801_ Introduction ___________________ Safety notes ___________________ Description ___________________ Application planning ___________________ Large Monitor Manager LMM0801 Installation ___________________ Connection Instruction for Use ___________________ Configuration and operation ___________________ Service and maintenance ___________________ Troubleshooting ___________________ Technical specifications ___________________ Dimension drawings...
  • Page 4 Note the following: WARNING EIZO products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by EIZO. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.

  • Page 5: Table Of Contents

    Table of contents Introduction ............................. 5 Contents of this document ......................5 LMM0801 - Overview of instruction for use ................... 5 Safety notes ............................6 General safety notes ........................6 Product-specific safety notes ....................... 12 Description ............................13 Scope of delivery.......................... 13 Correct usage ..........................
  • Page 6 Guidance and manufacturer's declaration - Electromagnetic emissions ........90 13.4 Repairs ............................90 13.5 China RoHS (Restriction of Hazardous Substances) ..............91 13.6 Accessory devices ........................93 13.7 Brands ............................93 13.8 Contact ............................93 Index ..............................95 Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...

  • Page 7: Introduction

    Introduction Contents of this document This document explains the operation and appropriate use of the LMM0801 Large Monitor Manager. The contents of this document are neither part of a previous or existing agreement, commitment or legal relationship, nor does it modify such.

  • Page 8: Safety Notes

    Safety notes General safety notes Correct transport, professional storage, installation and assembly, as well as careful operation and maintenance, are required to ensure that the devices operate safely and without faults. Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...
  • Page 9 No contact between device and patients The device is not suitable for direct contact with patients. Device and patient must never be touched simultaneously. Otherwise there is a danger to life and limb. Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...
  • Page 10 If you place objects on top of the device, this can lead to overheating and fire. Avoid penetration of liquid If liquid penetrates the device, this may result in an electric shock or failure of the device. Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...
  • Page 11 Only use power cables approved for China. These power cables are identified by the labels "CCC" or "CQC". Observe the country-specific regulations Observe all regulations of the country in which the device is used. Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...
  • Page 12 If the device is brought into a room with a higher or rising temperature, condensed water is formed in and on the device. Do not switch on the device until the condensed water has evaporated. Otherwise the device could be damaged. Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...
  • Page 13 Do not touch the monitor screen Due to mechanical pressure or electrostatic discharging, touching the screen can result in brief disturbances to the image. Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...

  • Page 14: Product-Specific Safety Notes

    The motherboard of the Large Monitor Manager has a lithium battery. This may only be replaced by the manufacturer. The provisions of the Battery Law (BattG) must be observed when disposing of the device. Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...

  • Page 15: Description

    ● CD with instruction for use and test patterns ● Power cable for US, EU, CN, JP ● 6 adapter cables for HMDI to DVI ● 4 adhesive feet for the enclosure ● 2 mounting brackets incl. screws Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...

  • Page 16: Correct Usage

    Up to eight different video source computers can be directly operated using one keyboard and mouse. User-defined layouts The user can configure the required layouts on the LMM0801 and then select one to suit the application case. Display of analog and digital signals...

  • Page 17: Layout Of Rating Plate, Additional Plate And Packaging Label

    IEC 60601. Electronic components have been selected that will remain available over the long term. Layout of rating plate, additional plate and packaging label Rating plate Additional plate Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...
  • Page 18 Description 3.4 Layout of rating plate, additional plate and packaging label Packaging label Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...

  • Page 19: Application Planning

    Application planning Installation location Note Protect the Large Monitor Manager LMM0801 from:  Dirt deposits  Ingress of dust  Moisture Provide adequate ventilation Ventilation slots are provided on the front and back of the device for the circulation of air.

  • Page 20: Installation

    Notes for positioning and mounting the device NOTICE Alterations to the device Do not make mechanical or electrical modifications to the device. EIZO GmbH accepts no liability if modifications are made to the device. Positioning the device The Large Monitor Manager can be used as a desktop device. It can be mounted either vertically or horizontally.
  • Page 21 If this is not the case, an additional element must be provided which allows access. The installation must comply with the relevant safety standards. Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...

  • Page 22: Connection

    CAUTION Shielding measures Observe all shielding measures described in the applicable national EMC Directive. If these guidelines are not observed, malfunction of the device may result. Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...
  • Page 23 CAUTION Disconnection from the power supply Always move the power switch on the device to the "OFF" position before you disconnect it from the supply. Otherwise, the device could be damaged. Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...

  • Page 24: Connection Panel

    Function ① PE connection Additional protective conductor connection ② PS2 socket For service purposes (at EIZO) (6x Mini-DIN connector) X1 to X6 USB Type A: Downstream (6x) For external USB devices such as keyboard, mouse, etc. with a maximum connection...

  • Page 25: Procedure For Connection

    – If you use the LMM0801-L, the monitor must support the resolution 2560x1600@60 Hz (4MP). – If you use the LMM0801-FHD, you will need a monitor that supports the resolution 1920x1080@60 Hz (FullHD). – For the LMM0801-WQHD, you require a monitor that supports a resolution of 2560x1440@60Hz.
  • Page 26 ● Use commercially available network components for this purpose, such as network cables, network hubs and switches. ● If you have questions about network installation, please contact your local network administrator. Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...
  • Page 27 1. Switch the device on. 2. The device is ready for use if LEDs L1 and L2 light up green. The LMM0801 must be configured the first time it is used. Please refer to the chapter "Configuration and operation" (page 28).

  • Page 28: Input Signals

    Image refresh rates Any image refresh rates can be used for inputs. EIZO recommends a refresh rate of 60 Hz, because the video output signal on the Large Monitor Manager has a refresh rate of 60 Hz. Large Monitor Manager LMM0801...
  • Page 29 The video bandwidth of the video signal with the largest scaling factor is reduced first. The smallest permissible value for the scaling factor is 1. Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...

  • Page 30: Configuration And Operation

    Large Monitor Manager. USB input Existing connection on the connection panel of the Large Monitor Manager (XA-XH and X1-X6). Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...
  • Page 31 Manager, multiple instances can be displayed with different presentations, e.g. 1:1, with a border, or as a cropping area. Each instance can be assigned to one or more windows and layouts. Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...

  • Page 32: Basic Icons

    During the layout configuration separated windows can be also be pinned and are not changeable. A dialog box or menu can be moved by clicking this icon and holding the mouse button down. Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...
  • Page 33 The video source can be operated using the keyboard. The video source can be operated using the keyboard and mouse. The video source is displayed with a lower refresh rate. Display with graph optimized scaling. Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...
  • Page 34 In the dialog box "Instance configuration of a video input", the miniature thumbnail of the instance has not yet been configured or deleted. The miniature thumbnail of the instance cannot be displayed. Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...

  • Page 35: Procedure For Setting Up The Large Monitor Manager

    Note: The default layout is displayed after switch-on or within 10 seconds of voltage recovery following a power failure. 15. Log off as administrator (chapter Sidebar "Base settings" abbreviated (page 37)). Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...

  • Page 36: Operation Via Remote Access

    NOTICE To avoid operating conflicts, the large Monitor manager should be operated either locally or remotely. EIZO recommends that you decide on one mode of operation. Several settings must be made to establish remote access for the first time. If the large Monotor Manager should be controlled via an existing network, please follow...
  • Page 37 For remote operation, the windows are identified by the associated thumbnail image; live images are not transferred. Some settings can only be checked by inspecting the changes made on the original image. This is particularly important with the function "Graph optimized scaling". Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...

  • Page 38: Overview Of The Sidebars

    Configuration and operation 7.5 Overview of the sidebars Overview of the sidebars ① Sidebar "Base settings" complete ② Sidebar "Input configuration" ③ Sidebar "Layout" ④ Sidebar "Instances" Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...

  • Page 39: Sidebar "Base Settings" (Abbreviated)

    The sidebar "Base settings" (abbreviated) can be used to perform the following functions: ● Call up general system information ● Change the language setting ● Log on as "Administrator" or "Default User with Extended Rights" ● Reboot and shutdown the Large Monitor Manager. Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...
  • Page 40 USB board Information about the hardware/firmware of the USB board. Multiplexer Information about the version of the firmware for inputs IN7.1 to IN8.4. FPGA Information about the version of the FPGA. Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...
  • Page 41 You can reset all passwords by using the master password. This can be created from the individual MAC address of the Large Monitor Manager. Click on and enter the master password. The master password can be generated and provided on request by EIZO GmbH. Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...
  • Page 42 Please refer to chapter “User permissions” on page 47. Note After shutting down the device, you must wait at least 15 seconds before you can switch the device on again. Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...

  • Page 43: Sidebar "Base Settings" (Complete)

    In the "Base settings" (complete) sidebar, you can make basic settings, such as common appearance, font color, network settings and perform a firmware update. To open the sidebar "Base settings" (complete), move the mouse pointer to the right-hand edge of the screen. Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...
  • Page 44 Configuration and operation 7.7 Sidebar "Base settings“ (complete) 7.7.1 System settings If you click on the button “system settings” the following dialog box will appear: Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...
  • Page 45 "Layout" in the same color. Click on the color field to change the color. Default setting: green Double click (ms) The speed for a double click can be set here. Default setting: 500 ms Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...
  • Page 46 3. Press the keys for the new shortcut on the keyboard. This defines the new shortcut key. EIZO recommends that no more than three keys are defined, because these have to be pressed simultaneously to exit the active window. Keys must always be defined for exiting the active window. Otherwise the focus is "trapped"...
  • Page 47 Configuration and operation 7.7 Sidebar "Base settings“ (complete) 7.7.2 Setting the network connection To set the network connection, click the "Network settings" button. The "Network settings" dialog box appears. Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...
  • Page 48 Default setting: IP address 169.254.213.144 Server To perform a firmware update or to store configuration data on a server, you must define here which server the Large Monitor Manager should access (chapter "Connection (page 50)). Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...
  • Page 49 ● Default user with extended rights (Advanced) ● Administrator (Service) Following start-up of the Large Monitor Managers, you are always logged on as default user. Note Additional roles cannot be created. Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...
  • Page 50 Configure outputs    View info  Shutdown and restart    Update firmware  Toggle watchdog   Change password   View all inputs  Change user rights Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...
  • Page 51 1. Use to change the date and time in steps until they show the required values. 2. Click "OK" 3. For the change to take effect, you must reboot the device. Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...
  • Page 52 Only perform a firmware update following consultation with your local distributor, or on the advice of EIZO. Only use firmware versions that have been approved by EIZO to ensure correct functioning of the Large Monitor Manager.
  • Page 53 If you reset the Large Monitor Manager to the factory defaults, all the user-defined settings are lost. To restore the factory defaults, click the "Restore Factory Defaults" button. A dialog box opens. Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...
  • Page 54 7.7.8 Create logbook NOTICE The information in the logbook is only intended for EIZO support personnel, and can only be evaluated by specialists from EIZO. To create the logbook for EIZO support, proceed as follows: 1. Click the "Logbook" button.

  • Page 55: Sidebar "Input Configuration

    Miniature thumbnail of an instance. ⑥ ⑤ When you move the mouse pointer over the miniature thumbnail of the instance, this toolbar is displayed. You can change, duplicate or delete an instance. Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...
  • Page 56 To adjust the LUT for the connected monitor, proceed as follows: 1. Double-click in the sidebar "input configuration" on the button "Monitor 1". 2. In the displayed dialog box select the desired LUT. 3. Close the dialog box. Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...
  • Page 57 Without the correct linking, it is not possible to access the video source with the mouse and keyboard. Click to assign the USB-B connection. Use the notes that you made during connection (chapter "Procedure for connection" (page 23)). Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...
  • Page 58 The layout of the dialog box varies depending on the input type. Analog video inputs VGA (IN7.1, IN8.1) and DVI-A (IN7.4, IN8.4) For VGA (IN7.1, IN8.1) and DVI-A (IN7.4, IN8.4) inputs, the following dialog box "Video input configuration" is displayed: Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...
  • Page 59 The test pattern can be generated by the Large Monitor Manager. To do this, click on button “Testpattern”. Save the generated image on a USB memory stick. Open the stored image in your source. Thereafter click on The automatically adjustment will be started. Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...
  • Page 60 Setting range: 0 to 255 Note EIZO recommends automatic ADC calibration. ADC calibration The ADC parameters can be set automatically. To do so a test pattern must be displayed with the correct resolution in the video source.
  • Page 61 Create an SMPTE test pattern and set the contrast such that the picture areas with 95% and 100% gray values visibly differ. Saturation The color intensity can be changed here. Setting range: 0 to 100% Default setting: 50% Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...
  • Page 62 The USB connection "XB" must be selected for each video input under "USB input" in the "Video input configuration" dialog box. ① ② Video signal 1 ③ Video signal 2 ④ Video signal 3 Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...
  • Page 63 ● To create a new instance, click on the button or duplicate an existing instance by clicking once on the symbol. ● In all cases, the dialog box "Instance configuration of a video input" is displayed. Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...
  • Page 64 The correct video input for which the instance is created already appears as default. To assign the same settings to a different video input, click the button and . The video input is selected. Default setting: the selected video input Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...
  • Page 65 If operation of a video source with mouse/keyboard (Focused Mode) is not necessary for a specific video source (e.g. video recorder), this can be disabled here. Default setting: "Mouse enabled" is set "Keyboard enabled" is set Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...
  • Page 66 If graph optimized scaling is active in two windows of a layout, the windows  must be placed on the left and right half of the screen and must not extend over the middle. Default setting: "Use graph optimized scaling" is not set Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...
  • Page 67 If different dialog boxes/menus show slight deviations in color (e.g. white to light gray), you can ensure that the two colors are recognized as dialog boxes/menus by increasing the color tolerance. Default setting: 0.0 (no tolerance) Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...
  • Page 68 Direct selection of the border in thumbnail Here you can define the sides on which a border is to be displayed. To do this, click on the individual border sides in the thumbnail. Default setting: Complete border Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...

  • Page 69: Sidebar "Layout

    Resets the user-defined settings in the layout to the original values. This is only possible if the settings have not already been saved. Creates a new layout (full screen). Saves the user-defined settings in the layout. Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...
  • Page 70 If the icon is shown in gray, the layout cannot be deleted. In this case, the selected layout is defined as the default. To delete it, you must define a different layout as the default. Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...
  • Page 71 The window is set to 1:1 aspect ratio. To do this, click on the button. The button is grayed out (not selectable) if no instance has been assigned to the selected window or there is no space available in the layout. Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...
  • Page 72 The size and position of the surrounding windows are automatically adjusted to the modified size of the window. To prevent such automatic changes, lock in the window's position and size with the pin button. Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...
  • Page 73 30 pixels. The zero position is the top left corner of the displayable screen area. Click into the field and enter the desired value for horizontal and vertical  position. Click the button in the sidebar "Layout" to save all settings. Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...

  • Page 74: Sidebar "Instances

    When you move the mouse pointer over the icon , a tooltip is displayed giving the number of errors on the monitor or system. See chapter Troubleshooting (page 77). Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...

  • Page 75: Screenshot Function

    1. Press "Print" on the keyboard. The dialog for saving the screenshot is displayed. 2. Click "Browse". 3. Select the storage location. 4. Enter a file name using the keyboard. 5. Click "OK". The dialog closes and the file is saved. Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...

  • Page 76: Information For Developers

    ● Saving the device configuration on memory media external to the Large Monitor Manager ● Reading the log file ● Saving the current screen contents ● Displaying text fields The software is distributed by EIZO. Contact your local distributor with any inquiries. Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...

  • Page 77: Service And Maintenance

    Cleaning the fan The Large Monitor Manager is equipped with fans. Depending on the environment, these may become dirty. The fans may only be cleaned by EIZO. Ensure that the vents are unobstructed Ensure that the vents for air intake and expelling are not covered.
  • Page 78 Alcohol Ethyl alcohol, 96% Hospiset cloth Peroxide compounds Perform Dismozon pur Gasoline Boiling range gasoline Benzine These cleaning agents and disinfectants can bleach the paint after longer periods of application. Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...

  • Page 79: Troubleshooting

    Certain hardware faults are indicated in the status window with a flashing red border. The status window is displayed when you move the mouse pointer to the bottom right corner of the screen. Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...
  • Page 80 Video bandwidth Monitoring the total video No measures necessary; these are bandwidth. (only an info automatically carried out by the Large Monitor display) Manager. See the chapter Input signals (page 26). Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...

  • Page 81: Technical Specifications

    Voltage outputs Number of voltage outputs, 5 V, 500 mA 10.2 Power supply Rated voltage 100 V to 240 V, 50 Hz to 60 Hz Power consumption 1.0 A to 0.5 A Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...

  • Page 82: Mechanical Design

    10 to 200 Hz at 1m/s² and 200 to 500 Hz at 0.3 m/s² compliant with EN 60068‑2‑64 (broad band noise) Shock Compliant with EN 60068-2-27 300 m/s², 6 ms (device in storage packaging) Falls Compliant with EN 24180-2 80 cm height Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...

  • Page 83: Safety Regulations

    3 V/m 80% AM 1 kHz Constant magnetic fields EN 61000-4-8 Alternating magnetic fields 4000 Aeff/m (maximum) 1000 Aeff/m (maximum) Line reaction to harmonics EN 61000-3-2 Line reaction to voltage fluctuations EN 61000-3-3 Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...

  • Page 84: Dimension Drawings

    Dimension drawings All dimensions in mm. 11.1 Dimension drawing without mounting bracket Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...

  • Page 85: Dimension Drawing With Mounting Bracket In Center

    Dimension drawings 11.2 Dimension drawing with mounting bracket in center 11.2 Dimension drawing with mounting bracket in center Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...

  • Page 86: Dimension Drawing With Mounting Bracket At Front

    Dimension drawings 11.3 Dimension drawing with mounting bracket at front 11.3 Dimension drawing with mounting bracket at front Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...

  • Page 87: Cable Strain Relief

    Dimension drawings 11.4 Cable strain relief 11.4 Cable strain relief Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...

  • Page 88: Spare Parts/Accessories

    Spare parts/accessories 12.1 Accessories RadiForce® RX430 We recommend use of the RadiForce® RX430 monitor for the LMM0801-L. This monitor supports the required resolution of 4MP (2560 x 1600) and has been tested and approved with the LMM0801-L. RadiForce® LX470W We recommend use of the RadiForce® LX470W monitor for the LMM0801-FHD.
  • Page 89 Cable strain relief We recommend the use of a cable strain relief device for correct placement of cables and in order to prevent them from being pulled out unintentionally (order number: 6GF-6030- 1AB00-0AA0). Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...

  • Page 90: Appendix

    Appendix 13.1 Markings and symbols The designations and symbols on the LMM0801 have the following meanings. Marking/symbol Description Symbol for "Caution, observe accompanying documents". Appears on the rating plate. CE marking (EU conformity mark). Appears on the rating plate. U.S. FCC marking for communication devices.
  • Page 91 Appears next to the 5 V connectors on the device housing (for power supply to external devices). Symbol for network connection. Appears above the network connection on the device housing. Symbol for "Observe instruction manual". Present on the device. Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...

  • Page 92: Warranty

    Guidance and manufacturer's declaration - Electromagnetic emissions The LMM0801 is intended for use in an environment such as that specified below. The customer or the user of the device should ensure that it is used in such an environment. Emissions test Compliance Electromagnetic environment –...

  • Page 93: China Rohs (Restriction Of Hazardous Substances)

    Appendix 13.5 China RoHS (Restriction of Hazardous Substances) 13.5 China RoHS (Restriction of Hazardous Substances) LMM0801 model: 6GF6030-1AA## (##=00..99) 根据SJ/T11364-2006《电子信息产品污染控制标识要求》特提供如下有关污染控制方面的信 息。 The following product pollution control information is provided according to SJ/T11364-2006 Marking for Control of Pollution caused by Electronic Information Products.
  • Page 94 Applications of hazardous substances in this medical device are required to achieve its intended clinical uses, and/or to  provide better protection to human beings and/or to environment, due to lack of reasonably (economically or technically) available substitutes. 产品中有毒有害物质或元素的名称及含量 Table of hazardous substances’ name and concentration. Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...

  • Page 95: Accessory Devices

    13.7 Brands The EIZO logo is a registered trademark of EIZO Corporation in Japan and other countries. EIZO is a registered trademark of EIZO Corporation in Japan and other countries. RadiForce is a registered trademark of EIZO Corporation in Japan and other countries.

  • Page 97: Index

    LEDs 77 Contact 93 Log off 39, 40 Correct usage 14 Log on 40 Logbook 52 Login 39, 40 Device information 38 adjusting 54 Error message 77 Maintenance 75 Manufacturer declaration 90 Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...
  • Page 98 VGA 56 Screenshot 73 Setting 42 Active window 42 Language 42 Warranty 90 Network connection 45 Watchdog 42 System time 49 Window Setup 33 Buttons 67 Sidebar Base settings (abbreviated) 37 Large Monitor Manager LMM0801 Instruction for Use, 05/2013, 1027079-006...
  • Page 100 Order No.: 1027079-006...

Table of Contents