Eizo LMM56800 Instructions For Use Manual page 50

Configuration and operation
6.8 "Input configuration" sidebar
Function
Vertical position
Frequency / phase
Auto adjustment
Monochrome
Select EDID
50
Description
The vertical position of the displayed image can be set down to a pixel.
Setting range: 0 ... 100 %
Default setting: 50 %
Vertical lines that are still slightly fuzzy can be corrected using the fre‐
quency and/or phase setting. The two parameters are automatically set as
soon as an analog picture signal is connected to the video input.
Setting range: 0 ... 100 %
The parameters for brightness, contrast, horizontal position, vertical posi‐
tion, frequency and phase can be automatically adjusted.
To do so a test pattern must be displayed with the correct resolution in the
video source. The test pattern can be generated by the Large Monitor
Manager. Click the "Test pattern" button.
Save the generated image on a USB memory stick.
Open the test pattern in your video source. Then click
.
Automatic adjustment takes place
By enabling this function a SoG (Sync on Green) signal is shown as a
monochrome signal.
Here you can define the EDID data for the selected video. This specifies
resolution to be provided by the graphics card of the video source. You
can select from the following EDID data:
LMM56800
Instructions for Use, 02/2014