Eizo LMM56800 Instructions For Use Manual page 10

Safety notes
2.1 General safety notes
NOTICE
Extensive damage to property may result if the device is not connected correctly
That is why you should observe the warning information:
• Desktop installation:
Place the device on a solid and level surface. The installed stand as well as the mounting surface
have to be suitable for the weight of the unit.
• For mounting on a wall or ceiling suspension:
The mount unit must be suitable for the weight of the device.
• For installation in a mounting frame:
Observe the installation sequence, and provide ventilation for the device.
Provide adequate air circulation
When installing the device, ensure that there is adequate air circulation for operation. The permissi‐
ble ambient temperature range must not be violated. Otherwise the device could be destroyed by
overheating.
Avoid sources of heat
Do not install the display in the vicinity of sources of heat, e.g. radiators, heating appliances or other
devices which can generate or emit heat.
Do not subject the device to jolting or shocks
The device contains sensitive electronic components that could be damaged by jolting or shocks.
Only switch on a cold device following acclimation to room temperature
If the device is brought into a room with a higher or rising temperature, condensed water will form in
and on the device. Do not switch on the device until the condensed water has evaporated. Otherwise
the device could be damaged.
10
LMM56800
Instructions for Use, 02/2014