Configuration and operation
6.8 "Input configuration" sidebar
If you click this button with the left mouse button, the active instance is duplicated.
All settings of the instance are copied.
If you click this button with the left mouse button, the selected instance is deleted. If
the instance was assigned to a window, the following symbol appears in the win‐
dow:
Adjust LUT at monitor output
Note
To adjust the lookup table (LUT) of the connected monitor using the Large Monitor Manag‐
er, the monitor must support switching of the LUT.
To adjust the LUT for the connected monitor, proceed as follows:
1. Double-click the "Monitor 1" button in the "Input configuration" sidebar.
46
LMM56800
Instructions for Use, 02/2014