NOTICE
Cable installation
Please note the following:
• Only shielded cables are to be used for all signal connections.
• If the relevant facility is available on the connector, all plug connections must be
screwed tight or locked.
• Do not route signal cables and power cords next to one another. Otherwise, line power
subject to heavy interference could result in reversible pixel errors.
• The device must not share a power supply with motors or valves (interference!).
• Externally connected cables can represent a trip hazard. Make sure that all incoming
cables are safely routed.
• If the device includes cable grips, please use them to prevent unintended loosening of
connected cables.
LMM56800
Instructions for Use, 02/2014
5.1 Safety information for connection
Connecting
21