System Menu - Elation SIXPAR 100WMG User Manual

SYSTEM MENU

ON-BOARD SYSTEM MENU
The SIXPAR 100IP™ comes with an easy to navigate system menu. The next sections will cover
how to access each menu function.
LCD CONTROL PANEL DISPLAY
The (4) button control panel (see image below) located on back of the fixture allows you to
access the main menu and make all necessary adjustments to the SIXPAR 100IP™.
During normal operation, pressing the MODE button will navigate through the different function
menus. Once you reach a desired menu, press the ENTER button to select that menu. The variable
field that can be adjusted within the selected menu will begin to flash. Using the UP or DOWN
buttons, adjust the field until the desired value is displayed. For example, the CHANNEL CH: menu
variable field can be set to 06, 07, 08, or 12. Pressing the ENTER button once will confirm your
selected value. Exit at any time without making any adjustments by pressing the MODE button.
INFORMATION DISPLAYED DURING INITIAL POWER ON
When the fixture is initially powered ON, the display shows the following information:
Update
Wait...
LCD CONTROL PANEL LOCKOUT
When the Display ON menu is set to ON or ON1, the LCD display will turn OFF after 30 seconds
and the (4) button Control Panel will be LOCKED. To unlock the (4) button LCD control panel,
press and hold the MODE button for 3 seconds when the unit is in ON mode, or press UP, DOWN,
UP, DOWN, ENTER when the unit is in ON1 mode.
When installing any Six Par IP unit in a permanent setting, we recommend setting your display
to the following: DISPLAY ON>ON1
Display On
Units in a permanent setting are exposed to various conditions, if a unit is set to OFF the
display may interpret a raindrop as a command and change the fixture's setting (phantom
touch). Setting a unit's display to ON 1 prevents this scenario by locking the touch display
after 30 seconds.
SIXPAR
100IP
OFF LCD Display Off after 30 sec
ON LCD Display Locks after 30 sec, press and
hold MODE for 3 sec to unlock
ON1 LCD Display Locks after 30 sec, press UP,
DOWN, UP, DOWN, ENTER to unlock
100IP
Vx.xx
18
*Fixture Software
Version (≥)