Table of Contents
Advertisement
S YS T E M M E N U
The fixture includes an easy to navigate system menu. The control panel display located on
the side of the fixture (illustrated below) provides access to the main system menu where all
necessary system adjustments are made to the fixture.
• During normal operation, pressing the MODE button once will access the fixture's main
menu.
• Once in the main menu you can navigate through the different functions and access the sub-
menus with the DOWN and UP buttons.
• Once you reach a field that requires adjusting, press the ENTER button to activate that field
and use the DOWN and UP buttons to adjust the field.
• Pressing the ENTER button once more will confirm the setting.
• Exit the main menu at any time without making any adjustments by pressing the MODE
button.
SCREEN LOCK
The screen will lock after a certain period of inactivity. The length of this time period is
configurable in the System Menu, under Personality > Display > Display Screen Lock. To unlock
the screen, press and hold the MODE button for 3 seconds.
WHITE BALANCE
The white balance menu can be accessed by pressing and holding the MODE, DOWN, and UP
buttons simultaneously for 3 seconds. Please note that in this mode, the Color menu will be
disabled, and the ColorTemp menu adjusts the color temperature white balance.
CONTROL KNOB
This device features an encoder knob located to the right of the display screen, which is
labeled "CTRL." This encoder knob can be used to manually adjust dimming, CCT green shift,
color saturation, or manual control. Twisting the knob will scroll through modes and sub-modes,
or adjust the value of the select sub-mode, while pressing the button confirms the selection.
Please see the Encoder Knobs section of this manual for detailed information.
A USB FLASH DRIVE CAN BE USED TO UPDATE THE FIXTURE TO THE LATEST
SOFTWARE. Using a USB Flash Drive loaded with the latest software, insert it
into the USB Service Port, then navigate to PERSONALITY/SERVICE, enter the
passcode (050), and select UPDATE SOFTWARE. A copy of the latest software
can be obtained by contacting Elation Support.
AN ELATION C-LOADER II CAN ALSO BE USED TO UPDATE THE FIXTURE TO THE
LATEST SOFTWARE. To order this device, please contact Elation Support for
further details.
ELATION SERVICE USA - Monday - Friday 8:00am to 4:30pm PST
323-582-3322 | Fax 323-832-9142 | support@elationlighting.com
ELATION SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET
+31 45 546 85 63 | Fax +31 45 546 85 96 | support@elationlighting.eu
MODE
DOWN
UP
ENTER
17
CTRL
Advertisement
Table of Contents
