Elation SIXPAR 100WMG User Manual page 13

I N S TA L L AT I O N G U I D E L I N E S
MOUNTING THE FIXTURE ON A TRUSS USING CLAMP
When mounting the fixture to a truss, be sure to secure an appropriately rated professional
grade rigging clamp (not included) to the closed dual yokes using an M10 screw fitted through
the center hole of the closed dual yokes. The dual yokes of the fixture provides a rigging point
for a SAFETY CABLE (not included). Be sure to only use one of the designated rigging points
for the safety cable and never secure a safety cable to a carrying handle.
SAFETY CABLE
ALWAYS ATTACH AN APPROPRIATELY RATED SAFETY CABLE WHENEVER INSTALLING THIS FIXTURE
IN A SUSPENDED ENVIRONMENT TO ENSURE THE FIXTURE WILL NOT FALL IF THE CLAMP FAILS.
13