Axis P47-PLVE Series User Manual page 31

AXIS P47-PLVE series
The web interface
Fallback to static IP address if DHCP isn't available: Select if you want to add a static IP address to use as fallback if DHCP
is unavailable and can't assign an IP address automatically.
Note
If DHCP isn't available and the device uses a static address fallback, the static address is configured with a limited scope.
IPv6
Assign IPv6 automatically: Select to turn on IPv6 and to let the network router assign an IP address to the device automatically.
Hostname
Assign hostname automatically: Select to let the network router assign a hostname to the device automatically.
Hostname: Enter the hostname manually to use as an alternative way of accessing the device. The server report and system log
use the hostname. Allowed characters are A–Z, a–z, 0–9 and -.
DNS servers
Assign DNS automatically: Select to let the DHCP server assign search domains and DNS server addresses to the device
automatically. We recommend automatic DNS (DHCP) for most networks.
Search domains: When you use a hostname that is not fully qualified, click Add search domain and enter a domain in which to
search for the hostname the device uses.
DNS servers: Click Add DNS server and enter the IP address of the DNS server. This provides the translation of hostnames to IP
addresses on your network.
HTTP and HTTPS
HTTPS is a protocol that provides encryption for page requests from users and for the pages returned by the web server. The encrypted
exchange of information is governed by the use of an HTTPS certificate, which guarantees the authenticity of the server.
To use HTTPS on the device, you must install an HTTPS certificate. Go to System > Security to create and install certificates.
Allow access through: Select if a user is allowed to connect to the device through the HTTP, HTTPS, or both HTTP and HTTPS
protocols.
Note
If you view encrypted web pages through HTTPS, you might experience a drop in performance, especially when you
request a page for the first time.
HTTP port: Enter the HTTP port to use. The device allows port 80 or any port in the range 1024-65535. If you are logged in as an
administrator, you can also enter any port in the range 1-1023. If you use a port in this range, you get a warning.
HTTPS port: Enter the HTTPS port to use. The device allows port 443 or any port in the range 1024-65535. If you are logged in as
an administrator, you can also enter any port in the range 1-1023. If you use a port in this range, you get a warning.
Certificate: Select a certificate to enable HTTPS for the device.
Network discovery protocols
31