i-PRO WV-S35302-F2LG User Manual page 238

9 [Image/Audio] for setting images and sound files
9.2 [Image] for setting JPEG images
display 1 stream(1)], [Camera 1 stream(2)], [Camera 1 JPEG], [Camera 2 stream(1)], [Camera 2
stream(2)], [Camera 2 JPEG], [Camera 3 stream(1)], [Camera 3 stream(2)], [Camera 3 JPEG],
[Camera 4 stream(1)], [Camera 4 stream(2)], [Camera 4 JPEG]/[Camera 4 JPEG]/ [Multi-sensor
+ PTZ]
[JPEG image updating speed (movie)*]
Select the rate at which the JPEG image is updated.
If [Image capture mode] is set to [Single source [4:3](30fps mode)]/[Dual sources [4:3](15fps
mode)]/[60fps mode]:
0.1fps/ 0.2fps/ 0.33fps/ 0.5fps/ 1fps/2fps/ 3fps/ 5fps/ 6fps/ 10fps/ 12fps/ 15fps/ 30fps
If [Image capture mode] is set to [Single source [4:3](25fps mode)]/[Dual sources [4:3](12.5fps
mode)]/[50fps mode]:
0.08fps/ 0.17fps/ 0.28fps/ 0.42fps/ 1fps/ 2.1fps/ 3.1fps/ 4.2fps/ 5fps/ 8.3fps/ 12.5fps/ 25fps
[Note:]
・Selecting JPEG enables you to select the update interval.
MJPEG/ [Refresh interval : 1s]/[Refresh interval : 3s]/[Refresh interval :
5s]/[Refresh interval : 10s]/[Refresh interval : 30s]/[Refresh interval : 60s]
・The streams can be selected when [Stream transmission] is [On].
・[MULTI] When [4 image display JPEG]/[3 image display JPEG] is selected,
[Refresh interval : 1s] [Still image update: 3 seconds] cannot be selected.
・[MULTI] Select [4 image display stream (2)], [3 image display stream (2)], [4
image display JPEG], or [3 image display JPEG] to select the following display
method.
[4 split]/[360 deg.]
[3 split]/[270 deg.]
・[MULTI] Four-image display is available for the four-eye model.
・[MULTI] Three-image display is available for the three-eye model.
・[MULTI_PTZ] Only Multi-directional/PTZ-integrated cameras can be selected
for [Multi-directional + PTZ].
[Note:]
・If [Stream transmission] is set to [On] and the value with [*] is set, the image
updating rate may be lower than the set value. The value with [*] depends on the
model. Refer to this item on the detailed camera setting screen for the relevant
parameters.
・The [*] option is omitted.