Table of Contents
Advertisement
15 [Schedule] for scheduling
3
To specify the time, click [▼] to set the time. Select [24h] when no time zone is set.
4
When [Set] is clicked after the setting is finished, the settings are displayed at the bottom of
the window.
Quality 2: Scene 2 (Scene file 2)], [Image Quality 3: Scene 3 (Scene file 3)], and
[Image Quality 4: Scene 4 (Scene file 4)] cannot be selected at the same time.
[Note:]
・[PTZ] When you configure the [Auto pan] [Patrol] [Preset sequence], make sure
that the times do not overlap.
・If [<Auto Schedule> Daytime: Image Quality 1/ Night: Image Quality 2] is
selected in Schedule 1, the time zone setting will be disabled.
Advertisement
Table of Contents
