Table of Contents
Advertisement
•
Make sure the handset is placed properly
on the charger. The battery icon animates
when charging.
•
Make sure the docking tone setting is turned
on. When the handset is placed correctly on
the charger, you can hear a docking tone.
•
The charging contacts are dirty. Disconnect
the power supply first and clean the contacts
with a damp cloth.
•
Check the LED indicator of your handset
for the charging status if [Menu] > [Phone
setup] > [Charge status] is selected.
•
Batteries are defective. Purchase new ones
with the same specifications. To remove the
battery door, refer to the instruction in the
following picture.
No display.
•
Make sure the batteries are charged.
•
Make sure there is power and the phone is
connected.
Bad audio (crackles, echo, etc.).
•
The handset is nearly out of range. Move it
closer to the base station.
•
The phone receives interference from the
nearby electrical appliances. Move the base
station away from them.
•
The phone is at a location with thick walls
Move the base away from them.
The handset does not ring.
Make sure the handset ringtone is turned on.
The caller ID does not display.
•
The service is not activated. Check with
your service provider.
•
The caller information is withheld or
unavailable.
Note
• If the above solutions do not help, disconnect the
power supply from both the handset and base
station. Try again after 1 minute.
EN
39
Advertisement
Table of Contents
