Philips XL4902S/38 User Manual page 35

Note
• To enter a pause, press and hold
• If the prefix number is set and the detect
number is left empty, the prefix number is added
to all outgoing calls.
• The feature is unavailable if the dialed number
starts with * and #.
Select the recall duration
Make sure that the recall time is set correctly
before you can answer a second call. In normal
case, the phone is already preset for the recall
duration. You can select among 3 options:
[Short], [Medium] and [Long]. The number of
available options varies with different countries.
For details, consult your service provider.
1
Select [Menu] > [Services] > [Recall time],
then press [OK] to confirm.
2
Select an option, then press [OK] to
confirm.
The setting is saved.
Dial mode
Note
• This feature only applies to models that support
both tone and pulse dial.
Dial mode is the telephone signal used in your
country. The phone supports tone (DTMF) and
pulse (rotary) dial. Consult the service provider
for detailed information.
34 EN
Set the dial mode
1
.
2
Auto clock
It synchronizes the date and time on your phone
with the public switched telephone network
(PSTN) automatically. For the date to be
synchronized, make sure the current year is set.
1
2
Select [Menu] > [Services] > [Dial mode],
then press [OK] to confirm.
Select a dial mode, then press[OK] to
confirm.
The setting is saved.
Note
• If your phone is in pulse dial mode, press
during a call for temporary tone mode. Digits
entered for this call are then sent out as tone
signals.
Note
• This service is country and network dependent.
• Make sure you have subscribed to the caller ID
service before you use this feature.
Select [Menu] > [Services] > [Auto clock],
then press [OK] to confirm.
Select [On]/[Off]. Press[OK].
The setting is saved.